Increases hair smoothness & softness
Not measurable from ingredients; depends on personal preference.
—
Subjective feel varies by hair.
Leave-in / Everyday leave-in, medium-weight
Scent:
The ingredient list declares fragrance. What it smells of is not stated, and we do not guess.
Manufacturer page: kenraprofessional.com
Personal fit
Complete the consultation to see exactly how well this product fits your hair and your goals. With 2,400+ products in our library we can match exactly the right products to you.
$49.00 one-time consultation, no subscription
Add the optional $49/year membership for unlimited adjustments for changes in weather and lifestyle.
The rest of what your plan weighs on this product.
The consultation builds your hair profile, then reads every factor in this table against it — and tells you where this product fits, or what to use instead.
Start your consultation$49.00 once, for your consultation and hair profile. No subscription, no required purchases.
Your avoid-list
Upper-mid price for a leave-in
$5.40/oz at 5 oz — more than 73% of the 549 leave-ins , which mostly run $1.25–5.69/oz. The cost less.
Great for
Maybe skip if
What the formula actually does
Each row says where it comes from: F means we derived it from this product’s own ingredient list, S means it is a claim the brand makes that the formula neither confirms nor contradicts.
Middle of the range — noticeable on fine hair, light on coarse hair.
Conditioning agents sit high in the list — this is a detangling formula.
Humectants near the top — water-binding is a headline mechanism here.
No oils or butters in the list.
No protein or amino acids in the list.
The brand states a protection temperature — a label claim, not a measurement.
Water-insoluble silicones or waxes: a detergent wash is what removes them.
Fragrance is listed; it sits below the working ingredients.
Ingredients that matter
The workhorse ingredients plus anything lower down that changes a decision. These chips name what an ingredient does — they are not safety scores, and no ingredient here is rated good or bad on its own.
| Ingredient | What it does | Why it matters | Chip |
|---|---|---|---|
| WaterAqua (Water, Eau) | solvent | The base everything else is dissolved in | Neutral |
| Cetearyl Alcohol | fatty alcohol | Thickens and conditions — not a drying alcohol | Softens |
| Dimethicone | silicone | Smooths the cuticle and adds shine | Buildup |
| Glycerin | humectant | Pulls water into the hair | Moisturizes |
| Behentrimonium Chloride | conditioning agent | Conditions and softens — this is what makes it comb through | Detangles |
| Isoamyl Laurate | light ester | Light slip without much weight | Softens |
| Phenoxyethanol | preservative | Keeps the product from spoiling | Stabilizes |
| Isopropyl Alcohol | drying alcohol | A small amount, for fast drying | Drying |
| FragranceParfum (Fragrance) | fragrance | The scent | Fragrance |
| Hexyl Cinnamal | fragrance | The scent | Fragrance |
| Hydroxycitronellal | fragrance | The scent | Fragrance |
| Citral | fragrance | The scent | Fragrance |
US labelling rules put ingredients above 1% in descending order of amount; below 1% they may be listed in any order. Annotations keep three readings separate: the ingredient's general function, its role in this product type, and what its position can support.
The base of almost every rinse-off and cream hair product. It carries everything else and is normally the first ingredient on the label.
Listed in the first three ingredients, it is likely a structural part of this formula.
A waxy fatty alcohol - nothing like drying alcohol. It gives conditioners their body and leaves a soft, smoothing film on the hair.
Listed in the first three ingredients, it is likely a structural part of this formula.
The waxy solid that gives a conditioner its body. It deposits a soft lubricating layer, which is most of what makes hair feel smooth after rinsing.
Deposits with the cationic conditioners and helps them lie flat along the strand, which is where the detangling actually comes from.
Near the top of a conditioner it is doing most of the conditioning, and most of the weighting, at the same time.
The most common conditioning silicone. It coats the strand for shine, slip, and frizz control, and needs a detergent (not just water) to wash out.
Listed in the first three ingredients, it is likely a structural part of this formula.
A surface film slows how quickly humidity reaches the cortex, which is what limits swelling-driven frizz in damp air.
Lays a smooth film along the cuticle, which lowers combing friction and flattens the surface irregularities that read as frizz.
Dimethicone does not disperse in water. On a routine that skips detergent it stays on the hair and accumulates wash after wash.
A small water-loving molecule that draws moisture into the hair and holds it there. It is the most common softening ingredient in conditioners and leave-ins.
Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.
High-porosity hair loses water fast; a humectant holds some of it in place for longer than the wash itself would.
Binds water into the outer layers of the strand, and water is what makes dry hair flexible again rather than brittle.
Water moves both ways. Measured across concentrations, glycerin solutions give water up in some conditions and take it from the air in others. What it does for you depends on how much of it is there and on the air around it.
A positively charged conditioning agent that binds to damaged, negatively charged spots on the hair. It is the main detangling ingredient in most rinse-out conditioners.
Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.
Electrokinetic measurement puts the C22 quat ahead of the C16 ones for deposition: the longer chain adds van der Waals stabilisation on top of the charge binding. That extra deposit is what coarse hair usually needs to comb through.
A cationic conditioning agent: it binds to the damaged, negatively charged parts of the cuticle and lowers combing friction there.
Substantive by design. A routine with no detergent wash gives it nothing to leave with.
A plant-derived light ester used as a silicone alternative for slip and shine.
Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.
A light emollient: it softens the surface with noticeably less weight than an oil or a butter.
Spreads thin and lowers friction between strands without the heaviness of a fixed oil.
The most common modern preservative; it keeps the product free of bacteria and mould. It sits well below 1% of the formula.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A fast-evaporating alcohol used as a solvent and to speed drying. Well down the list it is a processing aid; near the top it can leave hair feeling dry.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Evaporates on contact, which is how a spray sets almost instantly and leaves no weight behind it.
An undisclosed blend of scent ingredients. Regulations let it stay unlisted, so a fragrance-free product is the only way to be certain what is not in it.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Declared fragrance. On a fragrance-sensitive routine this is the line that decides it, wherever it sits on the label.
A conditioning agent used for slip in thick creams and masks.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A cationic conditioning agent: it binds to the damaged, negatively charged parts of the cuticle and lowers combing friction there.
The class that does the detangling in a conditioner. It deposits lubrication where the cuticle is worn.
Substantive by design. A routine with no detergent wash gives it nothing to leave with.
A quick-acting conditioning agent that reduces static and combing force. It also helps keep the formula stable.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
The C16 quat binds mostly by charge rather than by chain, so it deposits measurably less than the C22 ones. Less deposit is less conditioning and also less weight, which is usually the trade fine hair wants.
A cationic conditioning agent: it binds to the damaged, negatively charged parts of the cuticle and lowers combing friction there.
Substantive by design. A routine with no detergent wash gives it nothing to leave with.
A mild sugar-derived cleanser with a soft, low lather.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Mild cleansing leaves more surface lubrication in place on hair that dries out quickly.
A sugar-derived non-ionic detergent, among the gentlest in use. It cleanses with little foam of its own and little sebum removal.
Gentle cleansing leaves water-insoluble deposits largely in place; they come off with a stronger wash, not this one.
A gentle, biodegradable chelator that binds hard-water minerals in place of EDTA.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Binds the calcium and magnesium in hard water, which is what stops mineral deposits accumulating on the strand wash after wash.
Copper and iron carried in tap water deposit on the strand and read as a dull, warm cast on gray or light hair. A chelator holds those metals in solution so the wash carries them off.
Used to bring the product to a slightly acidic pH, which helps the cuticle lie flat. It is almost always near the end of the list.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Holds hard-water minerals in solution so they rinse away instead of depositing on the hair.
The acid side of pH adjustment, and the reason it matters is measured: alkaline formulas raise the fibre's surface negative charge, increase friction between strands and lift the scales, while lower-pH ones do the reverse.
Where a warm cast comes from water minerals rather than from the hair itself, holding those metals in solution is what removes it.
A conditioning polymer made from guar bean gum. It deposits during rinsing, which is why sulfate shampoos can still leave hair soft.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Gums thicken and set soft, which gives definition that bends rather than a rigid cast.
Cationic conditioners bind to the negatively charged damaged cuticle, laying it flat and cutting the friction that causes combing breakage.
A styling polymer dries into a film across the strands, which is what makes a shape hold instead of relax.
A humectant that also helps preserve the formula, often used where a brand wants a short preservative list.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Light and water-binding rather than oily, so it hydrates without contributing weight.
A small water-binding solvent. It holds moisture and helps the rest of the formula spread evenly over the strand.
A humectant follows the air: it holds water in humid conditions and can give it up in very dry ones. Climate decides what it does more than the label does.
A fermented sugar gum that thickens water-based formulas and adds soft, natural hold.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A polysaccharide film stays softer than a synthetic one as it dries, which is what leaves a curl defined but still able to move.
A soft film binds neighbouring strands together, which is most of what keeps flyaways lying down without stiffness.
Gum films stay soft. A style that needs firm fixation usually wants a synthetic polymer doing the holding.
A jasmine-like fragrance component named separately as a recognised allergen.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.
A soft floral fragrance component named separately as a recognised allergen.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.
A lemon-scented fragrance component listed separately as a recognised allergen.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.
A soft floral fragrance component listed separately as a recognised allergen.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.
A certified colour that tints the product itself. It does not colour hair.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A violet or blue colorant sits opposite yellow on the colour wheel, so a trace of it deposited on the surface makes a warm cast read cooler. It washes out over the following few washes.
Ingredient list captured 2026-08-23. Formulas change — check the package in your hand when an ingredient matters to you.
Price · 5 oz
Priced above the products that do the same job. Stores sell it above the $8 line; products that do this job typically go for about $17 at this size.
Sorted by price per ounce. Dated observations from our research, not live prices. Direct store pages, no affiliate links. We don’t sell this product.
Formula
The formula carries the systems a leave-in is built around, and it sits in the middle of the range for leave-ins per ounce.
The formula score is completeness for the job: the share of the systems this product type is normally built around that we can find in this list, weighted. It is not efficacy, not quality, and it never compares across product types.
Does the same job, for less
Same derived functions — what it cleans, conditions, coats or holds — at a lower cost per ounce. Scent, texture and where you buy it can still differ.
See more alternatives in the product library
These are functional neighbours, not personal recommendations — they are close on formula, not chosen for anyone. Get the one that fits your hair, routine, and budget



Final decision
People who blow-dry or flat-iron, looking for heat protection and a protein-free formula
Worth skipping for anyone sensitive to fragrance, curly-method routines, or very dry or high-damage hair
We do not sell products or take placement fees. This page states what the formula and the prices show; the consultation is what matches it to a person.
Claims check
Claims are quoted from the brand. We only mark one supported, partly supported, or conflicting when the ingredient list actually speaks to it; everything else stays "stated by the brand", which is not a criticism — most claims simply cannot be read off a label.
Increases hair smoothness & softness
Not measurable from ingredients; depends on personal preference.
—
Subjective feel varies by hair.
Controls frizz & 72 hour humidity protection
Humidity resistance is measured in a lab, not read off a label; film formers can help.
May help, but not measurable here.
Heat protection up to 450F/232C
Our library captures this as a heat protectant, but thermal protection is measured in a lab, not read off a list.
Sold for hot tools; untestable here.
Hydrates & nourishes
Humectants or rich emollients sit in the first eight ingredients.
Helps hair feel hydrated.
Provides 5x easier detangling
A brand-run study. We report it as stated and do not repeat the number as fact.
—
Only the brand’s testing shows this.
45% more smoothness
A brand-run study. We report it as stated and do not repeat the number as fact.
—
Only the brand’s testing shows this.
We look at the first 10–15 ingredients and what they do in a formula — not marketing. If the list doesn't speak to a claim, we don't assume.
Reviewers
Recurring themes our researchers wrote in their own words from sourced reviews. We do not store or scrape star ratings.
Wavy, thick, and curly users report unusually effective defrizzing, softness, and shine.
Billie and Jo, Ulta reviewersReviewers praise the scent, shine, and refreshed full-looking ends.
Ulta most-helpful positive reviewer and PowerReviews usersNozzle dispersion and lotion texture receive mixed feedback, including clumps or poor spray distribution.
Yucky and other Ulta reviewersUsers value heat-styling utility, while some report heaviness or grease when too much is used on straight or fine hair.
Ulta reviewers; manufacturer claims thermal protection up to 450F