Best-selling, sulfate-free leave-in treatment for strength repair in 1 use
A sales or award claim. It says nothing about what is in the bottle.
—
Popularity, not performance.
Heat protectant / Lotion, heat-protecting
Scent:
The ingredient list declares fragrance. What it smells of is not stated, and we do not guess.
Manufacturer page: redken.com
Personal fit
Complete the consultation to see exactly how well this product fits your hair and your goals. With 2,400+ products in our library we can match exactly the right products to you.
$49.00 one-time consultation, no subscription
Add the optional $49/year membership for unlimited adjustments for changes in weather and lifestyle.
The rest of what your plan weighs on this product.
The consultation builds your hair profile, then reads every factor in this table against it — and tells you where this product fits, or what to use instead.
Start your consultation$49.00 once, for your consultation and hair profile. No subscription, no required purchases.
Your avoid-list
Same job for less elsewhere
$6.94/oz at 5.1 oz — more than 83% of the 549 heat protectants , which mostly run $1.25–5.69/oz. It sells under what the cost.
Great for
Maybe skip if
What the formula actually does
Each row says where it comes from: F means we derived it from this product’s own ingredient list, S means it is a claim the brand makes that the formula neither confirms nor contradicts.
The brand states a protection temperature — a label claim, not a measurement.
Middle of the range — noticeable on fine hair, light on coarse hair.
Conditioning agents sit high in the list — this is a detangling formula.
Water-insoluble silicones or waxes: a detergent wash is what removes them.
Humectants appear, but low enough to be a minor part.
No fast-drying alcohol in the list.
Fragrance sits in the first eight ingredients — a larger share of the formula.
Ingredients that matter
The workhorse ingredients plus anything lower down that changes a decision. These chips name what an ingredient does — they are not safety scores, and no ingredient here is rated good or bad on its own.
| Ingredient | What it does | Why it matters | Chip |
|---|---|---|---|
| WaterAqua/Water/Eau | solvent | The base everything else is dissolved in | Neutral |
| Dimethicone | silicone | Spreads heat across the strand | Buildup |
| Cetearyl Alcohol | fatty alcohol | Thickens and conditions — not a drying alcohol | Softens |
| Amodimethicone | silicone | Spreads heat across the strand | Buildup |
| Phenoxyethanol | preservative | Keeps the product from spoiling | Stabilizes |
| Polyquaternium-37 | conditioning agent | Adds slip, lower in the list | Detangles |
| Dimethiconol | silicone | A little heat-spreading smoothing | Buildup |
| FragranceParfum/Fragrance | fragrance | The scent | Fragrance |
| Limonene | fragrance | The scent | Fragrance |
| Linalool | fragrance | The scent | Fragrance |
| Citronellol | fragrance | The scent | Fragrance |
| Citral | fragrance | The scent | Fragrance |
US labelling rules put ingredients above 1% in descending order of amount; below 1% they may be listed in any order. Annotations keep three readings separate: the ingredient's general function, its role in this product type, and what its position can support.
The base of almost every rinse-off and cream hair product. It carries everything else and is normally the first ingredient on the label.
Listed in the first three ingredients, it is likely a structural part of this formula.
The most common conditioning silicone. It coats the strand for shine, slip, and frizz control, and needs a detergent (not just water) to wash out.
Listed in the first three ingredients, it is likely a structural part of this formula.
A surface film slows how quickly humidity reaches the cortex, which is what limits swelling-driven frizz in damp air.
Lays a smooth film along the cuticle, which lowers combing friction and flattens the surface irregularities that read as frizz.
Dimethicone does not disperse in water. On a routine that skips detergent it stays on the hair and accumulates wash after wash.
A waxy fatty alcohol - nothing like drying alcohol. It gives conditioners their body and leaves a soft, smoothing film on the hair.
Listed in the first three ingredients, it is likely a structural part of this formula.
The waxy solid that gives a conditioner its body. It deposits a soft lubricating layer, which is most of what makes hair feel smooth after rinsing.
Deposits with the cationic conditioners and helps them lie flat along the strand, which is where the detangling actually comes from.
Near the top of a conditioner it is doing most of the conditioning, and most of the weighting, at the same time.
A silicone modified to stick where hair is damaged, so it smooths selectively instead of coating everything. It resists rinsing more than plain dimethicone.
Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.
A surface film slows how quickly humidity reaches the cortex, which is what limits swelling-driven frizz in damp air.
Amino-functional silicone carries a positive charge, so it binds where the cuticle is worn rather than coating evenly. Damaged areas get most of it.
Film formers are what hold a style: they dry into a connected film across the strands so the shape resists movement.
The most common modern preservative; it keeps the product free of bacteria and mould. It sits well below 1% of the formula.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A thickening polymer that gives creams and curl products their bounce and helps them cling to the strand.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Cationic polymers hold a curl loosely and stay soft, which is why they turn up in definition products rather than firm-hold ones.
A cationic polymer stays on the hair through rinsing, which is what keeps static and combing friction down after the wash.
Film formers are what hold a style: they dry into a connected film across the strands so the shape resists movement.
A high-shine silicone often paired with dimethicone for a smoother, glossier finish.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A surface film slows how quickly humidity reaches the cortex, which is what limits swelling-driven frizz in damp air.
Lays a smooth film along the cuticle, which lowers combing friction and flattens the surface irregularities that read as frizz.
An undisclosed blend of scent ingredients. Regulations let it stay unlisted, so a fragrance-free product is the only way to be certain what is not in it.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Declared fragrance. On a fragrance-sensitive routine this is the line that decides it, wherever it sits on the label.
A light, dry-feeling ester that spreads other ingredients and softens without a greasy finish.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A light emollient: it softens the surface with noticeably less weight than an oil or a butter.
Spreads thin and lowers friction between strands without the heaviness of a fixed oil.
A cellulose thickener with a fatty tail, so it thickens and leaves a conditioning film at once.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A polysaccharide film stays softer than a synthetic one as it dries, which is what leaves a curl defined but still able to move.
A soft film binds neighbouring strands together, which is most of what keeps flyaways lying down without stiffness.
Gum films stay soft. A style that needs firm fixation usually wants a synthetic polymer doing the holding.
A small water-loving molecule that draws moisture into the hair and holds it there. It is the most common softening ingredient in conditioners and leave-ins.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
High-porosity hair loses water fast; a humectant holds some of it in place for longer than the wash itself would.
Binds water into the outer layers of the strand, and water is what makes dry hair flexible again rather than brittle.
Water moves both ways. Measured across concentrations, glycerin solutions give water up in some conditions and take it from the air in others. What it does for you depends on how much of it is there and on the air around it.
Used to bring the product to a slightly acidic pH, which helps the cuticle lie flat. It is almost always near the end of the list.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Holds hard-water minerals in solution so they rinse away instead of depositing on the hair.
The acid side of pH adjustment, and the reason it matters is measured: alkaline formulas raise the fibre's surface negative charge, increase friction between strands and lift the scales, while lower-pH ones do the reverse.
Where a warm cast comes from water minerals rather than from the hair itself, holding those metals in solution is what removes it.
A citrus-smelling fragrance component that EU rules require to be named separately because some people react to it.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.
A strong base used in trace amounts to raise pH; fully neutralised in the finished product.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
The alkali half of a pH-adjusting pair, used in small amounts to bring a formula up to its target rather than to make it alkaline. Alkaline conditions raise the fibre's surface charge and lift the scales — but the finished pH is not on the label.
Vinegar acid, used in tiny amounts to bring the formula to an acidic pH so the cuticle lies flat.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
pH adjusters are how a formula is brought to a chosen acidity, and an acidic formula keeps the cuticle lying flatter than an alkaline one. Which way this one moves the pH depends on the formula, and the finished pH is not on the label.
A floral fragrance component listed separately as a recognised contact allergen.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.
A rose-like fragrance component named separately as a recognised allergen.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.
A lemon-scented fragrance component listed separately as a recognised allergen.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.
A clove-scented fragrance component listed separately as a recognised allergen.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.
Ingredient list captured 2026-08-23. Formulas change — check the package in your hand when an ingredient matters to you.
Price · 5.1 oz
Usually a good value. Most stores sell it under the $50 line, and products that do this job typically go for about $59 at this size.
Sorted by price per ounce. Dated observations from our research, not live prices. Direct store pages, no affiliate links. We don’t sell this product.
Formula
This is a complete heat protectant formula. It is also above the range for heat protectants per ounce, with 2 close matches selling for meaningfully less.
The formula score is completeness for the job: the share of the systems this product type is normally built around that we can find in this list, weighted. It is not efficacy, not quality, and it never compares across product types.
Does the same job, for less
Same derived functions — what it cleans, conditions, coats or holds — at a lower cost per ounce. Scent, texture and where you buy it can still differ.
See more alternatives in the product library
These are functional neighbours, not personal recommendations — they are close on formula, not chosen for anyone. Get the one that fits your hair, routine, and budget

Final decision
People who blow-dry or flat-iron who want heat protection and a protein-free formula
Not ideal for anyone sensitive to fragrance, curly-method routines, or vegan and cruelty-free shopping
Matrix Brass Off All-In-One Toning Leave In Spray, for similar results at a lower price
We do not sell products or take placement fees. This page states what the formula and the prices show; the consultation is what matches it to a person.
Claims check
Claims are quoted from the brand. We only mark one supported, partly supported, or conflicting when the ingredient list actually speaks to it; everything else stays "stated by the brand", which is not a criticism — most claims simply cannot be read off a label.
Best-selling, sulfate-free leave-in treatment for strength repair in 1 use
A sales or award claim. It says nothing about what is in the bottle.
—
Popularity, not performance.
Combats 1 year of visible damage in 1 use
This is a marketing claim; an ingredient list cannot speak to it.
—
Can’t be confirmed from label.
88% visual reduction of split ends
A brand-run study. We report it as stated and do not repeat the number as fact.
—
Only the brand’s testing shows this.
Bond repair on the go
No protein or bond ingredient appears in the list.
Can’t be confirmed from label.
2x less breakage
A brand-run study. We report it as stated and do not repeat the number as fact.
—
Only the brand’s testing shows this.
10x smoother
A brand-run study. We report it as stated and do not repeat the number as fact.
—
Only the brand’s testing shows this.
pH balancing
A pH adjuster is present, which is how a formula is brought to an acidic pH.
Brought to an acidic pH.
Product did not strip hair color
This is a marketing claim; an ingredient list cannot speak to it.
—
Can’t be confirmed from label.
We look at the first 10–15 ingredients and what they do in a formula — not marketing. If the list doesn't speak to a claim, we don't assume.
Reviewers
Recurring themes our researchers wrote in their own words from sourced reviews. We do not store or scrape star ratings.
no residue, more glossy/vibrant
did not weigh hair down or leave a residue... more vibrant glossyhydrates bleached microloc'd textured hair
I have 3c hair and LOVE this product!... microlocs... hydrate her bleached endssofter, stronger after one use
Makes hair feel softer and stronger, even after just one use