Moisture Lock Leave-In Conditioner

US labelling rules put ingredients above 1% in descending order of amount; below 1% they may be listed in any order. Annotations keep three readings separate: the ingredient's general function, its role in this product type, and what its position can support.

• 1 Water
  General function

  The base of almost every rinse-off and cream hair product. It carries everything else and is normally the first ingredient on the label.

  Leading ingredient

  Listed in the first three ingredients, it is likely a structural part of this formula.

  • solvent
• 2 Cetyl Peg/Ppg-10/1 Dimethicone
  General function

  A silicone. Silicones coat the strand for slip, shine and frizz control; unless the name carries PEG or PPG, removing one takes a detergent rather than water.

  Leading ingredient

  Listed in the first three ingredients, it is likely a structural part of this formula.

  May suitClimate-sensitive or frizz-prone hair

  A surface film slows how quickly humidity reaches the cortex, which is what limits swelling-driven frizz in damp air.

  May suitFrizz-prone, damaged, or high-friction hair

  Lays a smooth film along the cuticle, which lowers combing friction and flattens the surface irregularities that read as frizz.

  May not suitBuild-up-sensitive routines

  Dimethicone does not disperse in water. On a routine that skips detergent it stays on the hair and accumulates wash after wash.

  • silicone
  • conditioning agent
• 3 Glycerin
  General function

  A small water-loving molecule that draws moisture into the hair and holds it there. It is the most common softening ingredient in conditioners and leave-ins.

  Leading ingredient

  Listed in the first three ingredients, it is likely a structural part of this formula.

  May suitDry, coarse, or high-porosity hair

  High-porosity hair loses water fast; a humectant holds some of it in place for longer than the wash itself would.

  May suitVery dry or highly damaged hair

  Binds water into the outer layers of the strand, and water is what makes dry hair flexible again rather than brittle.

  DependsClimate-sensitive or frizz-prone hair

  Water moves both ways. Measured across concentrations, glycerin solutions give water up in some conditions and take it from the air in others. What it does for you depends on how much of it is there and on the air around it.

  Scientific Reports
  • humectant
• 4 Cetearyl Alcohol
  General function

  A waxy fatty alcohol - nothing like drying alcohol. It gives conditioners their body and leaves a soft, smoothing film on the hair.

  Supporting ingredient

  Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.

  May suitDry, coarse, or high-porosity hair

  The waxy solid that gives a conditioner its body. It deposits a soft lubricating layer, which is most of what makes hair feel smooth after rinsing.

  May suitFrizz-prone, damaged, or high-friction hair

  Deposits with the cationic conditioners and helps them lie flat along the strand, which is where the detangling actually comes from.

  DependsFine or easily flattened hair

  Near the top of a conditioner it is doing most of the conditioning, and most of the weighting, at the same time.

  PubChem
  • fatty alcohol
  • emollient
  • thickener
• 5 Cetyl Alcohol
  General function

  A fatty alcohol used to thicken creams and add slip. It softens rather than dries.

  Supporting ingredient

  Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.

  May suitDry, coarse, or high-porosity hair

  The waxy solid that gives a conditioner its body. It deposits a soft lubricating layer, which is most of what makes hair feel smooth after rinsing.

  May suitFrizz-prone, damaged, or high-friction hair

  Deposits with the cationic conditioners and helps them lie flat along the strand, which is where the detangling actually comes from.

  DependsFine or easily flattened hair

  Near the top of a conditioner it is doing most of the conditioning, and most of the weighting, at the same time.

  PubChem
  • fatty alcohol
  • emollient
  • thickener
• 6 Amodimethicone
  General function

  A silicone modified to stick where hair is damaged, so it smooths selectively instead of coating everything. It resists rinsing more than plain dimethicone.

  Supporting ingredient

  Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.

  May suitClimate-sensitive or frizz-prone hair

  A surface film slows how quickly humidity reaches the cortex, which is what limits swelling-driven frizz in damp air.

  May suitFrizz-prone, damaged, or high-friction hair

  Amino-functional silicone carries a positive charge, so it binds where the cuticle is worn rather than coating evenly. Damaged areas get most of it.

  May suitMaximum-hold styling

  Film formers are what hold a style: they dry into a connected film across the strands so the shape resists movement.

  International Journal of Trichology
  • silicone
  • conditioning agent
  • film former
• 7 Hamamelis Virginiana (Witch Hazel) Bark/Leaf/Twig Extract
  General function

  An extract of Witch Hazel (Hamamelis Virginiana). Plant extracts are used across a wide range of levels, and label order is the best guide to how much is here.

  Supporting ingredient

  Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.

  • botanical extract
• 8 Camellia Oleifera (Green Tea) Leaf Extract
  General function

  An extract from the leaf of Green Tea (Camellia Oleifera). Plant extracts are used across a wide range of levels, and label order is the best guide to how much is here.

  Supporting ingredient

  Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.

  • botanical extract
• 9 Opuntia Ficus-Indica (Prickly Pear) Stem Extract
  • botanical extract
• 10 Hydroxyethylcellulose
  General function

  A cellulose thickener that gives gels and conditioners their body and adds a soft, flexible film.

  Secondary ingredient

  Lower in the ordered portion of the list, it is more likely playing a supporting role than defining the formula.

  May suitCurls or waves needing flexible hold

  A polysaccharide film stays softer than a synthetic one as it dries, which is what leaves a curl defined but still able to move.

  May suitFrizz-prone, damaged, or high-friction hair

  A soft film binds neighbouring strands together, which is most of what keeps flyaways lying down without stiffness.

  May not suitMaximum-hold styling

  Gum films stay soft. A style that needs firm fixation usually wants a synthetic polymer doing the holding.

  PubChem
  • gum
  • thickener
  • film former
• ▾Below about this point, order stops being meaningful — these are typically used at 1% or less.
• 11 Disodium EDTA
  General function

  Grabs metal ions from hard water so they cannot dull the hair or destabilise the formula.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May suitBuild-up-sensitive routines

  Binds the calcium and magnesium in hard water, which is what stops mineral deposits accumulating on the strand wash after wash.

  May suitGray, silver, or brass-prone hair

  Copper and iron carried in tap water deposit on the strand and read as a dull, warm cast on gray or light hair. A chelator holds those metals in solution so the wash carries them off.

  PubChem
  • hard-water chelator
• 12 Panthenol · Panthenol (Pro-Vitamin B5)
  General function

  Provitamin B5. It draws in water and penetrates the strand a little, which is why it is the standard ingredient for softness and shine claims.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May suitFine or easily flattened hair

  It hydrates without adding oil or a film, which is the combination fine hair usually needs.

  May suitFrizz-prone, damaged, or high-friction hair

  Deposits a lubricating layer that makes combing easier, which is most of what stops mechanical damage adding to frizz.

  May suitVery dry or highly damaged hair

  A humectant that also penetrates the cuticle, so it holds water inside the strand rather than only on the surface.

  PubChem
  • humectant
  • conditioning agent
  • vitamin
• 13 Behentrimonium Methosulfate
  General function

  A mild cationic conditioner known for heavy detangling with a light rinse-out feel. Common in curly-hair conditioners.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May suitFrizz-prone, damaged, or high-friction hair

  A cationic conditioning agent: it binds to the damaged, negatively charged parts of the cuticle and lowers combing friction there.

  May suitVery dry or highly damaged hair

  The class that does the detangling in a conditioner. It deposits lubrication where the cuticle is worn.

  DependsBuild-up-sensitive routines

  Substantive by design. A routine with no detergent wash gives it nothing to leave with.

  International Journal of Cosmetic Science
  • conditioning agent
  • emulsifier
• 14 Stearyl Alcohol
  General function

  A fatty alcohol that thickens conditioners and helps them coat the hair evenly.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May suitDry, coarse, or high-porosity hair

  The waxy solid that gives a conditioner its body. It deposits a soft lubricating layer, which is most of what makes hair feel smooth after rinsing.

  May suitFrizz-prone, damaged, or high-friction hair

  Deposits with the cationic conditioners and helps them lie flat along the strand, which is where the detangling actually comes from.

  PubChem
  • fatty alcohol
  • emollient
  • thickener
• 15 Hydrogenated Castor Oil/Sebacic Acid Copolymer
  General function

  A castor-derived wax polymer that thickens balms and helps a style hold.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May suitFrizz-prone, damaged, or high-friction hair

  Emollients fill and smooth the surface of the strand, which lowers the friction that lifts the cuticle and reads as roughness.

  May suitMaximum-hold styling

  A wax holds by staying solid on the strand, which gives grip and separation rather than a set film that cracks.

  DependsCurls or waves needing flexible hold

  How rigid the finish is depends on which polymer it is and what the formula pairs with it, not on there being one.

  • wax
  • film former
  • emollient
• 16 Butylene Glycol
  General function

  A light humectant and carrier that helps extracts dissolve.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May suitFine or easily flattened hair

  Light and water-binding rather than oily, so it hydrates without contributing weight.

  May suitVery dry or highly damaged hair

  A small water-binding solvent. It holds moisture and helps the rest of the formula spread evenly over the strand.

  DependsClimate-sensitive or frizz-prone hair

  A humectant follows the air: it holds water in humid conditions and can give it up in very dry ones. Climate decides what it does more than the label does.

  PubChem
  • humectant
  • solvent
• 17 PVP · Polyvinylpyrrolidone/PVP
  General function

  A classic hairspray polymer. It gives firm hold but attracts moisture, so humidity can soften the set.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May suitMaximum-hold styling

  Synthetic film formers dry into a continuous film, which is what holds a shape against movement and against humid air.

  DependsBuild-up-sensitive routines

  Some acrylate copolymers rinse with water and some need a detergent; the label alone does not say which one a formula used.

  DependsCurls or waves needing flexible hold

  It sets firm on its own. Whether the curl stays flexible depends on the plasticisers and oils the rest of the formula carries.

  PubChem
  • film former
  • polymer
• 18 Polyquaternium-59
  General function

  A styling polymer chosen for a soft, brushable hold.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May suitCurls or waves needing flexible hold

  Cationic polymers hold a curl loosely and stay soft, which is why they turn up in definition products rather than firm-hold ones.

  May suitFrizz-prone, damaged, or high-friction hair

  A cationic polymer stays on the hair through rinsing, which is what keeps static and combing friction down after the wash.

  May suitMaximum-hold styling

  Film formers are what hold a style: they dry into a connected film across the strands so the shape resists movement.

  • conditioning agent
  • film former
  • polymer
• 19 Citric Acid
  General function

  Used to bring the product to a slightly acidic pH, which helps the cuticle lie flat. It is almost always near the end of the list.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May suitBuild-up-sensitive routines

  Holds hard-water minerals in solution so they rinse away instead of depositing on the hair.

  May suitFrizz-prone, damaged, or high-friction hair

  The acid side of pH adjustment, and the reason it matters is measured: alkaline formulas raise the fibre's surface negative charge, increase friction between strands and lift the scales, while lower-pH ones do the reverse.

  May suitGray, silver, or brass-prone hair

  Where a warm cast comes from water minerals rather than from the hair itself, holding those metals in solution is what removes it.

  International Journal of Trichology
  • pH adjuster
  • hard-water chelator
• 20 Phenoxyethanol
  • preservative
• 21 Ethylhexylglycerin
  General function

  A preservative booster that also adds a little softness. Almost always paired with phenoxyethanol.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May suitFrizz-prone, damaged, or high-friction hair

  Emollients fill and smooth the surface of the strand, which lowers the friction that lifts the cuticle and reads as roughness.

  PubChem
  • preservative
  • emollient
• 22 Leuconostoc/Radish Root Ferment Filtrate
  • preservative
• 23 Fragrance
  General function

  An undisclosed blend of scent ingredients. Regulations let it stay unlisted, so a fragrance-free product is the only way to be certain what is not in it.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May not suitFragrance-sensitive routines

  Declared fragrance. On a fragrance-sensitive routine this is the line that decides it, wherever it sits on the label.

  • fragrance
  • declared fragrance
• 24 Citrus Limon (Lemon) Peel Oil · Citrus Limon Peel Oil
  General function

  A cold-pressed citrus oil used for a fresh scent; naturally high in limonene.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May not suitFragrance-sensitive routines

  Essential oils are fragrance. Several carry constituents on the EU list of declared fragrance allergens, so a label with no fragrance line can still be a scented product.

  • botanical extract
  • essential oil
  • fragrance
• 25 Pinene
  General function

  A pine-scented component of essential oils, declared as part of the fragrance.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May not suitFragrance-sensitive routines

  Declared fragrance. On a fragrance-sensitive routine this is the line that decides it, wherever it sits on the label.

  • fragrance
• 26 Citronellol
  General function

  A rose-like fragrance component named separately as a recognised allergen.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May not suitFragrance-sensitive routines

  One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.

  PubChem
  • fragrance
  • named fragrance allergen
• 27 Coumarin
  General function

  A sweet, hay-like fragrance component listed separately as a recognised allergen.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May not suitFragrance-sensitive routines

  One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.

  PubChem
  • fragrance
  • named fragrance allergen
• 28 Geraniol
  General function

  A rose-scented fragrance component, listed on its own because some people react to it.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May not suitFragrance-sensitive routines

  One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.

  • fragrance
  • named fragrance allergen
• 29 Hexyl Cinnamal
  General function

  A jasmine-like fragrance component named separately as a recognised allergen.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May not suitFragrance-sensitive routines

  One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.

  PubChem
  • fragrance
  • named fragrance allergen
• 30 Hydroxycitronellal
  General function

  A soft floral fragrance component named separately as a recognised allergen.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May not suitFragrance-sensitive routines

  One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.

  PubChem
  • fragrance
  • named fragrance allergen
• 31 Limonene
  General function

  A citrus-smelling fragrance component that EU rules require to be named separately because some people react to it.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May not suitFragrance-sensitive routines

  One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.

  PubChem
  • fragrance
  • named fragrance allergen
• 32 Linalool
  General function

  A floral fragrance component listed separately as a recognised contact allergen.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May not suitFragrance-sensitive routines

  One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.

  PubChem
  • fragrance
  • named fragrance allergen

What the whole list adds up to

• 10 fragrances
• 7 named fragrance allergens
• 5 emollients
• 5 film formers
• 4 thickeners
• 4 botanical extracts
• 3 conditioning agents
• 3 humectants
• 3 fatty alcohols
• 3 preservatives
• 2 solvents
• 2 silicones
• 2 hard-water chelators
• 2 conditioning agents

Ingredient list captured 2026-08-23. Formulas change — check the package in your hand when an ingredient matters to you.