Strong Hold, Frizz Free Forming Fiber

US labelling rules put ingredients above 1% in descending order of amount; below 1% they may be listed in any order. Annotations keep three readings separate: the ingredient's general function, its role in this product type, and what its position can support.

• 1 Water · Aqua/Water/Eau
  General function

  The base of almost every rinse-off and cream hair product. It carries everything else and is normally the first ingredient on the label.

  Leading ingredient

  Listed in the first three ingredients, it is likely a structural part of this formula.

  • solvent
• 2 Lanolin Wax
  General function

  The solid fraction of lanolin, used to give balms body and hold.

  Leading ingredient

  Listed in the first three ingredients, it is likely a structural part of this formula.

  May suitMaximum-hold styling

  A wax holds by staying solid on the strand, which gives grip and separation rather than a set film that cracks.

  May suitVery dry or highly damaged hair

  Forms a physical barrier on the strand that slows water leaving it. Nothing else in a formula holds moisture in as bluntly.

  May not suitBuild-up-sensitive routines

  It does not disperse in water at all: removing it means a detergent wash, and until then it stays exactly where it landed.

  • film former
  • sealant
  • wax
• 3 Peg-8 Beeswax
  General function

  An ethoxylated or propoxylated formulation aid. Ingredients of this family keep oils, silicones and fragrance evenly dispersed in a water-based product.

  Leading ingredient

  Listed in the first three ingredients, it is likely a structural part of this formula.

  • emulsifier
• 4 Glycerin
  General function

  A small water-loving molecule that draws moisture into the hair and holds it there. It is the most common softening ingredient in conditioners and leave-ins.

  Supporting ingredient

  Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.

  May suitDry, coarse, or high-porosity hair

  High-porosity hair loses water fast; a humectant holds some of it in place for longer than the wash itself would.

  May suitVery dry or highly damaged hair

  Binds water into the outer layers of the strand, and water is what makes dry hair flexible again rather than brittle.

  DependsClimate-sensitive or frizz-prone hair

  Water moves both ways. Measured across concentrations, glycerin solutions give water up in some conditions and take it from the air in others. What it does for you depends on how much of it is there and on the air around it.

  Scientific Reports
  • humectant
• 5 Polyquaternium-69
  General function

  A humidity-resistant styling polymer used in anti-frizz sprays and creams.

  Supporting ingredient

  Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.

  May suitCurls or waves needing flexible hold

  Cationic polymers hold a curl loosely and stay soft, which is why they turn up in definition products rather than firm-hold ones.

  May suitFrizz-prone, damaged, or high-friction hair

  A cationic polymer stays on the hair through rinsing, which is what keeps static and combing friction down after the wash.

  May suitMaximum-hold styling

  Film formers are what hold a style: they dry into a connected film across the strands so the shape resists movement.

  • conditioning agent
  • film former
  • polymer
• 6 PEG-40 Hydrogenated Castor Oil
  General function

  A castor-oil derivative that dissolves fragrance and oils into water so the product stays clear and does not separate.

  Supporting ingredient

  Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.

  • solubilizer
  • emulsifier
• 7 Hydrogenated Castor Oil
  General function

  Castor oil hardened into a wax. It thickens balms and gives a firm, sealing feel.

  Supporting ingredient

  Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.

  May suitFrizz-prone, damaged, or high-friction hair

  Emollients fill and smooth the surface of the strand, which lowers the friction that lifts the cuticle and reads as roughness.

  May suitMaximum-hold styling

  A wax holds by staying solid on the strand, which gives grip and separation rather than a set film that cracks.

  May suitVery dry or highly damaged hair

  Forms a physical barrier on the strand that slows water leaving it. Nothing else in a formula holds moisture in as bluntly.

  • wax
  • emollient
  • sealant
• 8 Glyceryl Behenate
  General function

  A wax ester used to thicken and to give a smooth, powdery finish.

  Supporting ingredient

  Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.

  May suitFine or easily flattened hair

  A light emollient: it softens the surface with noticeably less weight than an oil or a butter.

  May suitFrizz-prone, damaged, or high-friction hair

  Spreads thin and lowers friction between strands without the heaviness of a fixed oil.

  May suitMaximum-hold styling

  A wax holds by staying solid on the strand, which gives grip and separation rather than a set film that cracks.

  • light ester
  • wax
  • emollient
• 9 Alcohol Denat.
  General function

  Fast-drying alcohol used to make sprays set quickly. In leave-on products it can leave hair feeling dry, especially in high position on the list.

  Secondary ingredient

  Lower in the ordered portion of the list, it is more likely playing a supporting role than defining the formula.

  May suitFine or easily flattened hair

  Evaporates on contact, which is how a spray sets almost instantly and leaves no weight behind it.

  PubChem
  • drying alcohol
  • solvent
• 10 Peg-40 Castor Oil
  • solubilizer
  • emulsifier
• 11 Panthenol
  General function

  Provitamin B5. It draws in water and penetrates the strand a little, which is why it is the standard ingredient for softness and shine claims.

  Secondary ingredient

  Lower in the ordered portion of the list, it is more likely playing a supporting role than defining the formula.

  May suitFine or easily flattened hair

  It hydrates without adding oil or a film, which is the combination fine hair usually needs.

  May suitFrizz-prone, damaged, or high-friction hair

  Deposits a lubricating layer that makes combing easier, which is most of what stops mechanical damage adding to frizz.

  May suitVery dry or highly damaged hair

  A humectant that also penetrates the cuticle, so it holds water inside the strand rather than only on the surface.

  PubChem
  • humectant
  • conditioning agent
  • vitamin
• ▾Below about this point, order stops being meaningful — these are typically used at 1% or less.
• 12 Ethylhexylglycerin
  General function

  A preservative booster that also adds a little softness. Almost always paired with phenoxyethanol.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May suitFrizz-prone, damaged, or high-friction hair

  Emollients fill and smooth the surface of the strand, which lowers the friction that lifts the cuticle and reads as roughness.

  PubChem
  • preservative
  • emollient
• 13 Butylene Glycol
  General function

  A light humectant and carrier that helps extracts dissolve.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May suitFine or easily flattened hair

  Light and water-binding rather than oily, so it hydrates without contributing weight.

  May suitVery dry or highly damaged hair

  A small water-binding solvent. It holds moisture and helps the rest of the formula spread evenly over the strand.

  DependsClimate-sensitive or frizz-prone hair

  A humectant follows the air: it holds water in humid conditions and can give it up in very dry ones. Climate decides what it does more than the label does.

  PubChem
  • humectant
  • solvent
• 14 Lanolin Alcohol
  • fatty alcohol
  • emollient
  • emulsifier
• 15 Sodium Polyacrylate
• 16 Hydrogenated Polydecene
  General function

  A synthetic light emollient used for slip that does not go rancid.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May suitFrizz-prone, damaged, or high-friction hair

  Emollients fill and smooth the surface of the strand, which lowers the friction that lifts the cuticle and reads as roughness.

  • emollient
• 17 PEG-45m
  • thickener
• 18 Trideceth-6
  • emulsifier
  • solubilizer
• 19 Citric Acid
  General function

  Used to bring the product to a slightly acidic pH, which helps the cuticle lie flat. It is almost always near the end of the list.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May suitBuild-up-sensitive routines

  Holds hard-water minerals in solution so they rinse away instead of depositing on the hair.

  May suitFrizz-prone, damaged, or high-friction hair

  The acid side of pH adjustment, and the reason it matters is measured: alkaline formulas raise the fibre's surface negative charge, increase friction between strands and lift the scales, while lower-pH ones do the reverse.

  May suitGray, silver, or brass-prone hair

  Where a warm cast comes from water minerals rather than from the hair itself, holding those metals in solution is what removes it.

  International Journal of Trichology
  • pH adjuster
  • hard-water chelator
• 20 BHT
  • antioxidant
• 21 Carbomer
  General function

  A thickener that turns a liquid into a clear gel. It also contributes a light hold.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May suitClimate-sensitive or frizz-prone hair

  A set polymer film is a physical barrier to humidity, so a style keeps its shape longer in damp conditions.

  May suitMaximum-hold styling

  Synthetic film formers dry into a continuous film, which is what holds a shape against movement and against humid air.

  DependsBuild-up-sensitive routines

  Some acrylate copolymers rinse with water and some need a detergent; the label alone does not say which one a formula used.

  • thickener
  • polymer
  • film former
• 22 Sodium Hydroxide
  General function

  A strong base used in trace amounts to raise pH; fully neutralised in the finished product.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  DependsFrizz-prone, damaged, or high-friction hair

  The alkali half of a pH-adjusting pair, used in small amounts to bring a formula up to its target rather than to make it alkaline. Alkaline conditions raise the fibre's surface charge and lift the scales — but the finished pH is not on the label.

  International Journal of Trichology
  • pH adjuster
• 23 Fragrance · Parfum/Fragrance
  General function

  An undisclosed blend of scent ingredients. Regulations let it stay unlisted, so a fragrance-free product is the only way to be certain what is not in it.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May not suitFragrance-sensitive routines

  Declared fragrance. On a fragrance-sensitive routine this is the line that decides it, wherever it sits on the label.

  • fragrance
  • declared fragrance
• 24 Phenoxyethanol
  • preservative
• 25 Butylphenyl Methylpropional
  General function

  A floral fragrance component (lilial) named separately as a recognised allergen; increasingly reformulated out.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May not suitFragrance-sensitive routines

  One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.

  PubChem
  • fragrance
  • named fragrance allergen
• 26 hydroxyisohexyl 3-cyclohexene carboxaldehyde
  General function

  An individual aroma chemical. It is part of the product's fragrance; brands that print these are disclosing more of the blend than the rules require.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May not suitFragrance-sensitive routines

  Declared fragrance. On a fragrance-sensitive routine this is the line that decides it, wherever it sits on the label.

  • fragrance
• 27 Benzyl Cinnamate
  General function

  A balsamic fragrance component listed as a recognised allergen.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May not suitFragrance-sensitive routines

  One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.

  • fragrance
  • named fragrance allergen
• 28 Benzyl Salicylate
  General function

  A soft floral fragrance component listed separately as a recognised allergen.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May not suitFragrance-sensitive routines

  One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.

  PubChem
  • fragrance
  • named fragrance allergen
• 29 Citronellol
  General function

  A rose-like fragrance component named separately as a recognised allergen.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May not suitFragrance-sensitive routines

  One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.

  PubChem
  • fragrance
  • named fragrance allergen
• 30 Geraniol
  General function

  A rose-scented fragrance component, listed on its own because some people react to it.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May not suitFragrance-sensitive routines

  One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.

  • fragrance
  • named fragrance allergen
• 31 Hexyl Cinnamal
  General function

  A jasmine-like fragrance component named separately as a recognised allergen.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May not suitFragrance-sensitive routines

  One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.

  PubChem
  • fragrance
  • named fragrance allergen
• 32 Hydroxycitronellal
  General function

  A soft floral fragrance component named separately as a recognised allergen.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May not suitFragrance-sensitive routines

  One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.

  PubChem
  • fragrance
  • named fragrance allergen
• 33 Limonene
  General function

  A citrus-smelling fragrance component that EU rules require to be named separately because some people react to it.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May not suitFragrance-sensitive routines

  One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.

  PubChem
  • fragrance
  • named fragrance allergen
• 34 Linalool
  General function

  A floral fragrance component listed separately as a recognised contact allergen.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May not suitFragrance-sensitive routines

  One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.

  PubChem
  • fragrance
  • named fragrance allergen
• 35 Alpha-Isomethyl Ionone · Alpha Isomethyl Ionone
  General function

  A violet-like fragrance component named separately as a recognised allergen.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May not suitFragrance-sensitive routines

  One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.

  PubChem
  • fragrance
  • named fragrance allergen

What the whole list adds up to

• 12 fragrances
• 10 named fragrance allergens
• 5 emulsifiers
• 5 emollients
• 3 solvents
• 3 film formers
• 3 waxs
• 3 humectants
• 3 solubilizers
• 2 sealants
• 2 polymers
• 2 preservatives
• 2 thickeners
• 2 pH adjusters

Ingredient list captured 2026-08-27. Formulas change — check the package in your hand when an ingredient matters to you.