Style Lock Sculpting Hair Gel

In the US, ingredients above 1% are listed from most to least. Below 1% they can appear in any order. Each note keeps three things apart: what the ingredient generally does, its role in this type of product, and what its position can tell you.

• 1 Water · Water (Aqua)
  General function

  The base of almost every rinse-off and cream hair product. It carries everything else and is normally the first ingredient on the label.

  Leading ingredient

  Listed in the first three ingredients, it is likely a structural part of this formula.

  • solvent
• 2 PVP
  General function

  A classic hairspray polymer. It gives firm hold but attracts moisture, so humidity can soften the set.

  Leading ingredient

  Listed in the first three ingredients, it is likely a structural part of this formula.

  May suitMaximum-hold styling

  Synthetic film formers dry into a continuous film, which is what holds a shape against movement and against humid air.

  DependsBuild-up-sensitive routines

  Some acrylate copolymers rinse with water and some need a detergent; the label alone does not say which one a formula used.

  May not suitClimate-sensitive or frizz-prone hair

  The film takes up water from the air. The patent work that produced the VP/VA copolymers describes a PVP film turning sticky after time in a humid atmosphere, and being dependable only where humidity is low — so hold and feel both move with the weather.

  PubChem
  • film former
  • polymer
• 3 Polysorbate 20
  General function

  Keeps fragrance and oils dissolved in a watery formula so it stays clear.

  Leading ingredient

  Listed in the first three ingredients, it is likely a structural part of this formula.

  • solubilizer
  • emulsifier
• ▾Below about here, the order stops meaning much. These are usually used at 1% or less.
• 4 Phenoxyethanol
  General function

  The most common modern preservative; it keeps the product free of bacteria and mould. It sits well below 1% of the formula.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  PubChem
  • preservative
• 5 Carbomer
  General function

  A thickener that turns a liquid into a clear gel. It also contributes a light hold.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May suitClimate-sensitive or frizz-prone hair

  A set polymer film is a physical barrier to humidity, so a style keeps its shape longer in damp conditions.

  May suitMaximum-hold styling

  Synthetic film formers dry into a continuous film, which is what holds a shape against movement and against humid air.

  DependsBuild-up-sensitive routines

  Some acrylate copolymers rinse with water and some need a detergent; the label alone does not say which one a formula used.

  • thickener
  • polymer
  • film former
• 6 Sorbitol
  General function

  A sugar-based humectant that adds moisture and a slight cushiony feel.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May suitDry, coarse, or high-porosity hair

  High-porosity hair loses water fast; a humectant holds some of it in place for longer than the wash itself would.

  May suitVery dry or highly damaged hair

  Binds water into the outer layers of the strand, and water is what makes dry hair flexible again rather than brittle.

  DependsClimate-sensitive or frizz-prone hair

  A humectant moves water in whichever direction the air allows: it holds moisture in humid conditions and can pull it back out of hair in very dry ones.

  PubChem
  • humectant
• 7 Triethanolamine
  General function

  A base used in trace amounts to neutralise acidic polymers so a gel thickens.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  DependsFrizz-prone, damaged, or high-friction hair

  pH adjusters are how a formula is brought to a chosen acidity, and an acidic formula keeps the cuticle lying flatter than an alkaline one. Which way this one moves the pH depends on the formula, and the finished pH is not on the label.

  PubChem
  • pH adjuster
• 8 Fragrance · Fragrance (Parfum)
  General function

  An undisclosed blend of scent ingredients. Regulations let it stay unlisted, so a fragrance-free product is the only way to be certain what is not in it.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May not suitFragrance-sensitive routines

  Declared fragrance. On a fragrance-sensitive routine this is the line that decides it, wherever it sits on the label.

  • fragrance
  • declared fragrance
• 9 Propylene Glycol
  General function

  A small humectant and solvent that keeps formulas stable and helps active ingredients spread.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May suitFine or easily flattened hair

  Light and water-binding rather than oily, so it adds less weight than oils or butters do.

  May suitVery dry or highly damaged hair

  A small water-binding solvent. It holds moisture and helps the rest of the formula spread evenly over the strand.

  DependsClimate-sensitive or frizz-prone hair

  A humectant follows the air: it holds water in humid conditions and can give it up in very dry ones. Climate decides what it does more than the label does.

  PubChem
  • humectant
  • solvent
• 10 Disodium EDTA
  General function

  Grabs metal ions from hard water so they cannot dull the hair or destabilise the formula.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May suitBuild-up-sensitive routines

  Binds the calcium and magnesium in hard water, which is what stops mineral deposits accumulating on the strand wash after wash.

  May suitGray, silver, or brass-prone hair

  Copper and iron carried in tap water deposit on the strand and read as a dull, warm cast on gray or light hair. A chelator holds those metals in solution so the wash carries them off.

  PubChem
  • hard-water chelator
• 11 Iodopropynyl Butylcarbamate
  • preservative
• 12 Silk Amino Acids
  General function

  Silk protein broken into amino acids, used for slip and shine rather than strength.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May suitVery dry or highly damaged hair

  Amino acids are the smallest protein fraction and bind water as well, so they add far less stiffness than a hydrolysed protein does.

  DependsProtein-sensitive hair

  The lightest option in the protein family, but still protein — worth watching if protein reliably stiffens your hair.

  • protein
  • amino acid
• 13 Alpha-Isomethyl Ionone
  General function

  A violet-like fragrance component named separately as a recognised allergen.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May not suitFragrance-sensitive routines

  One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.

  PubChem
  • fragrance
  • named fragrance allergen
• 14 Benzyl Alcohol
  • preservative
  • solvent
• 15 Citronellol
  General function

  A rose-like fragrance component named separately as a recognised allergen.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May not suitFragrance-sensitive routines

  One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.

  PubChem
  • fragrance
  • named fragrance allergen
• 16 Hexyl Cinnamal
  General function

  A jasmine-like fragrance component named separately as a recognised allergen.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May not suitFragrance-sensitive routines

  One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.

  PubChem
  • fragrance
  • named fragrance allergen
• 17 Limonene
  General function

  A citrus-smelling fragrance component that EU rules require to be named separately because some people react to it.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May not suitFragrance-sensitive routines

  One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.

  PubChem
  • fragrance
  • named fragrance allergen
• 18 Linalool
  General function

  A floral fragrance component listed separately as a recognised contact allergen.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May not suitFragrance-sensitive routines

  One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.

  PubChem
  • fragrance
  • named fragrance allergen

What the whole list adds up to

• 6 fragrances
• 5 named fragrance allergens
• 3 solvents
• 3 preservatives
• 2 film formers
• 2 polymers
• 2 humectants
• 1 solubilizer
• 1 emulsifier
• 1 thickener
• 1 pH adjuster
• 1 declared fragrance
• 1 hard-water chelator
• 1 protein

Ingredient list captured 2026-10-10. Formulas change, so check the package in your hand when an ingredient matters to you.