Conditioner / Everyday rinse-out, detangling
Add it to your products. We’ll tell you if it’s ever recalled.
Scent:
The ingredient list declares fragrance. What it smells of is not stated, and we do not guess.
Manufacturer page: randco.com
Personal fit
Complete the consultation to see how well this product fits your hair and your goals. With 6,000+ products in our library, we can match you to the right ones.
$49 with 60 days of follow-up questions and plan updates
$99 with 12 months. Pay once; the year renews only if you choose.
The rest of what your plan weighs on this product.
The consultation builds your hair profile, checks every factor in this table against it, and tells you where this product fits or what to use instead.
Start your consultation$49 once, with 60 days of follow-up questions and plan updates. Nothing renews, and you never have to buy a product.
Your avoid-list
Same job for less elsewhere
$7.21/oz at 6.8 oz, more than 97% of the 1119 conditioners , which mostly run $0.94–3.41/oz.
Great for
Maybe skip if
What the formula actually does
Each row says where it comes from: F means we derived it from this product’s own ingredient list, S means it is a claim the brand makes that the formula neither confirms nor contradicts.
Conditioning agents sit high in the list, so this is a detangling formula.
Oils are present, but low enough to be a finishing touch.
Middle of the range: noticeable on fine hair, light on coarse hair.
Humectants near the top: binding water is one of its main jobs.
Protein appears, low enough to be a supporting ingredient.
Water-insoluble silicones or waxes: a detergent wash is what removes them.
Contains chelators, which bind hard-water and pool minerals.
Fragrance is listed; it sits below the working ingredients.
Ingredients that matter
The workhorse ingredients, plus anything lower down that changes a decision. The chips name what an ingredient does. They are not safety scores, and no ingredient here is rated good or bad on its own.
| Ingredient | What it does | Why it matters | Chip |
|---|---|---|---|
| WaterWater (Aqua/Eau) | solvent | The base everything else is dissolved in | Neutral |
| Cetearyl Alcohol | fatty alcohol | Thickens and conditions (not a drying alcohol) | Softens |
| Behentrimonium Chloride | conditioning agent | Conditions and softens so hair combs through | Detangles |
| Cetyl Alcohol | fatty alcohol | Thickens and conditions (not a drying alcohol) | Softens |
| Propanediol | humectant | Pulls water into the hair | Moisturizes |
| Stearyl Alcohol | fatty alcohol | Thickens and conditions (not a drying alcohol) | Softens |
| Lauryl/Myristyl Polyricinoleate | light ester | Light slip without much weight | Softens |
| Cetyl Esters | light ester | Light slip without much weight | Softens |
| FragranceFragrance (Parfum) | fragrance | The scent | Fragrance |
| Isopropyl Alcohol | drying alcohol | A small amount, for fast drying | Drying |
| Hydrogenated Castor Oil/Sebacic Acid Copolymer | wax | Adds a little grip | Buildup |
| Jojoba Esters | wax | Adds a little grip | Buildup |
In the US, ingredients above 1% are listed from most to least. Below 1% they can appear in any order. Each note keeps three things apart: what the ingredient generally does, its role in this type of product, and what its position can tell you.
The base of almost every rinse-off and cream hair product. It carries everything else and is normally the first ingredient on the label.
Listed in the first three ingredients, it is likely a structural part of this formula.
A waxy fatty alcohol - nothing like drying alcohol. It gives conditioners their body and leaves a soft, smoothing film on the hair.
In conditioner, cetearyl alcohol gives the emulsion its creamy structure and helps it spread evenly through the hair. Its emollient layer adds slip and a smoother feel.
Listed in the first three ingredients, it is likely a structural part of this formula.
May suit dry, coarse, or high-porosity hair that benefits from added slip and a more substantial conditioning film.
Deposits with the cationic conditioners and helps them lie flat along the strand, which is where the detangling actually comes from.
Consider if hair is fine or easily flattened: a formula built heavily around fatty alcohols can feel richer than a lightweight conditioner.
A positively charged conditioning agent that binds to damaged, negatively charged spots on the hair. It is the main detangling ingredient in most rinse-out conditioners.
Listed in the first three ingredients, it is likely a structural part of this formula.
Electrokinetic measurement puts the C22 quat ahead of the C16 ones for deposition: the longer chain adds van der Waals stabilisation on top of the charge binding. That extra deposit is what coarse hair usually needs to comb through.
A cationic conditioning agent: it binds to the damaged, negatively charged parts of the cuticle and lowers combing friction there.
Substantive by design. A routine with no detergent wash gives it nothing to leave with.
A fatty alcohol used to thicken creams and add slip. It softens rather than dries.
Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.
The waxy solid that gives a conditioner its body. It deposits a soft lubricating layer, which is most of what makes hair feel smooth after rinsing.
Deposits with the cationic conditioners and helps them lie flat along the strand, which is where the detangling actually comes from.
Near the top of a conditioner it is doing most of the conditioning, and most of the weighting, at the same time.
A corn-derived humectant and solvent, often chosen as a lighter-feeling alternative to propylene glycol.
Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.
Light and water-binding rather than oily, so it adds less weight than oils or butters do.
A small water-binding solvent. It holds moisture and helps the rest of the formula spread evenly over the strand.
A humectant follows the air: it holds water in humid conditions and can give it up in very dry ones. Climate decides what it does more than the label does.
A fatty alcohol that thickens conditioners and helps them coat the hair evenly.
Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.
The waxy solid that gives a conditioner its body. It deposits a soft lubricating layer, which is most of what makes hair feel smooth after rinsing.
Deposits with the cationic conditioners and helps them lie flat along the strand, which is where the detangling actually comes from.
Near the top of a conditioner it is doing most of the conditioning, and most of the weighting, at the same time.
A fatty ester. Esters give slip and a smooth after-feel; lighter ones read dry and silky, heavier ones read rich.
Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.
A light emollient: it softens the surface with noticeably less weight than an oil or a butter.
Spreads thin and lowers friction between strands without the heaviness of a fixed oil.
A waxy ester blend that replaces spermaceti in creams. It thickens and leaves a smooth, non-greasy finish.
Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.
A light emollient: it softens the surface with noticeably less weight than an oil or a butter.
Spreads thin and lowers friction between strands without the heaviness of a fixed oil.
A gentle conditioning agent activated by the acid in the formula. It smooths the cuticle without much build-up.
Lower in the ordered portion of the list, it is more likely playing a supporting role than defining the formula.
A cationic conditioning agent: it binds to the damaged, negatively charged parts of the cuticle and lowers combing friction there.
The class that does the detangling in a conditioner. It deposits lubrication where the cuticle is worn.
Substantive by design. A routine with no detergent wash gives it nothing to leave with.
A light plant-derived ester used for slip and a non-greasy finish.
Lower in the ordered portion of the list, it is more likely playing a supporting role than defining the formula.
A light emollient: it softens the surface with noticeably less weight than an oil or a butter.
Spreads thin and lowers friction between strands without the heaviness of a fixed oil.
An olive-derived emollient that softens and thickens without a heavy oily feel.
Lower in the ordered portion of the list, it is more likely playing a supporting role than defining the formula.
A light emollient: it softens the surface with noticeably less weight than an oil or a butter.
Spreads thin and lowers friction between strands without the heaviness of a fixed oil.
A rich, solid plant butter used for heavy conditioning on coarse or dry hair. High in the list it makes a product decidedly heavy.
Lower in the ordered portion of the list, it is more likely playing a supporting role than defining the formula.
Coarse, porous hair loses water quickly and can carry the weight; a butter slows that loss more than a thin oil does.
Emollients fill and smooth the surface of the strand, which lowers the friction that lifts the cuticle and reads as roughness.
A solid fat melts onto the strand at body temperature and stays there, which is the heaviest surface moisture-holding a formula can offer.
An undisclosed blend of scent ingredients. Regulations let it stay unlisted, so a fragrance-free product is the only way to be certain what is not in it.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Declared fragrance. On a fragrance-sensitive routine this is the line that decides it, wherever it sits on the label.
A fast-evaporating alcohol used as a solvent and to speed drying. Well down the list it is a processing aid; near the top it can leave hair feeling dry.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Evaporates on contact, which is how a spray sets almost instantly and leaves no weight behind it.
A conditioning polymer made from guar bean gum. It deposits during rinsing, which is why sulfate shampoos can still leave hair soft.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Gums thicken and set soft, which gives definition that bends rather than a rigid cast.
Cationic conditioners bind to the negatively charged damaged cuticle, laying it flat and cutting the friction that causes combing breakage.
A styling polymer dries into a film across the strands, which is what makes a shape hold instead of relax.
A castor-derived wax polymer that thickens balms and helps a style hold.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Emollients fill and smooth the surface of the strand, which lowers the friction that lifts the cuticle and reads as roughness.
A wax holds by staying solid on the strand, which gives grip and separation rather than a set film that cracks.
How rigid the finish is depends on which polymer it is and what the formula pairs with it, not on there being one.
A polymer used to hold pigments and oils in a durable film.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A set polymer film is a physical barrier to humidity, so a style keeps its shape longer in damp conditions.
Synthetic film formers dry into a continuous film, which is what holds a shape against movement and against humid air.
Some acrylate copolymers rinse with water and some need a detergent; the label alone does not say which one a formula used.
A jojoba-derived wax that gives a soft, cushioned finish and light hold in balms.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A light emollient: it softens the surface with noticeably less weight than an oil or a butter.
Spreads thin and lowers friction between strands without the heaviness of a fixed oil.
A wax holds by staying solid on the strand, which gives grip and separation rather than a set film that cracks.
A flexible hold polymer used for touchable styling and humidity resistance.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A set polymer film is a physical barrier to humidity, so a style keeps its shape longer in damp conditions.
Synthetic film formers dry into a continuous film, which is what holds a shape against movement and against humid air.
Some acrylate copolymers rinse with water and some need a detergent; the label alone does not say which one a formula used.
A branched hydrocarbon of the stated chain length. It spreads other ingredients thinly and evaporates, leaving the hair without added weight.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Emollients fill and smooth the surface of the strand, which lowers the friction that lifts the cuticle and reads as roughness.
The waxy fraction of olive oil, used to seal and soften without a liquid-oil feel.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Emollients fill and smooth the surface of the strand, which lowers the friction that lifts the cuticle and reads as roughness.
Forms a physical barrier on the strand that slows water leaving it. Nothing else in a formula holds moisture in as bluntly.
Flaxseed gel. A natural polysaccharide that gives soft, flexible hold in curl products.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A polysaccharide film stays softer than a synthetic one as it dries, which is what leaves a curl defined but still able to move.
A soft film binds neighbouring strands together, which is most of what helps flyaways lie down.
Gum films stay soft. A style that needs firm fixation usually wants a synthetic polymer doing the holding.
A plant-derived light ester used where a silicone-free but silky feel is wanted.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A light emollient: it softens the surface with noticeably less weight than an oil or a butter.
Spreads thin and lowers friction between strands without the heaviness of a fixed oil.
A quick-acting conditioning agent that reduces static and combing force. It also helps keep the formula stable.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
The C16 quat binds mostly by charge rather than by chain, so it deposits measurably less than the C22 ones. Less deposit is less conditioning and also less weight, which is usually the trade fine hair wants.
A cationic conditioning agent: it binds to the damaged, negatively charged parts of the cuticle and lowers combing friction there.
Substantive by design. A routine with no detergent wash gives it nothing to leave with.
A light fatty ester used to soften and carry other oil-based ingredients.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A light emollient: it softens the surface with noticeably less weight than an oil or a butter.
Spreads thin and lowers friction between strands without the heaviness of a fixed oil.
A gentle preservative helper that also holds a little moisture.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Humectants bind water into the strand, and water — not oil — is what makes dry hair flexible instead of brittle.
A humectant follows the air: it holds water in humid conditions and can give it up in very dry ones. Climate decides what it does more than the label does.
A light ester used as a spreading agent for oils and fragrance.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A light emollient: it softens the surface with noticeably less weight than an oil or a butter.
Spreads thin and lowers friction between strands without the heaviness of a fixed oil.
A workhorse emulsifier that holds oil and water together in a cream.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Emollients fill and smooth the surface of the strand, which lowers the friction that lifts the cuticle and reads as roughness.
Provitamin B5. It draws in water and penetrates the strand a little, which is why it is the standard ingredient for softness and shine claims.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
It hydrates without adding oil or a film, which is the combination fine hair usually needs.
Deposits a lubricating layer that makes combing easier, which is most of what stops mechanical damage adding to frizz.
A humectant that also penetrates the cuticle, so it holds water inside the strand rather than only on the surface.
A cellulose thickener with a fatty tail, so it thickens and leaves a conditioning film at once.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A polysaccharide film stays softer than a synthetic one as it dries, which is what leaves a curl defined but still able to move.
A soft film binds neighbouring strands together, which is most of what helps flyaways lie down.
Gum films stay soft. A style that needs firm fixation usually wants a synthetic polymer doing the holding.
A rice-derived chelator that binds hard-water minerals without EDTA.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Binds the calcium and magnesium in hard water, which is what stops mineral deposits accumulating on the strand wash after wash.
Copper and iron carried in tap water deposit on the strand and read as a dull, warm cast on gray or light hair. A chelator holds those metals in solution so the wash carries them off.
A synthetic film-forming polymer. Polymers of this kind dry to a continuous film on the hair, which is how a styling product holds a shape.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A set polymer film is a physical barrier to humidity, so a style keeps its shape longer in damp conditions.
Synthetic film formers dry into a continuous film, which is what holds a shape against movement and against humid air.
Some acrylate copolymers rinse with water and some need a detergent; the label alone does not say which one a formula used.
Glycerin, also called glycerol, attracts moisture and mixes completely with water.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
High-porosity hair loses water fast; a humectant holds some of it in place for longer than the wash itself would.
Binds water into the outer layers of the strand, and water is what makes dry hair flexible again rather than brittle.
Water moves both ways. Measured across concentrations, glycerin solutions give water up in some conditions and take it from the air in others. What it does for you depends on how much of it is there and on the air around it.
A rich oil used in masks and heavier creams for softness on coarse or dry hair.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Coats the surface and slows water leaving the strand, which is usually what coarse hair that dries out fast is missing.
A thin oil layer lowers friction between strands and flattens the raised cuticle that scatters light and catches on its neighbours.
Used to bring the product to a slightly acidic pH, which helps the cuticle lie flat. It is almost always near the end of the list.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Holds hard-water minerals in solution so they rinse away instead of depositing on the hair.
The acid side of pH adjustment, and the reason it matters is measured: alkaline formulas raise the fibre's surface negative charge, increase friction between strands and lift the scales, while lower-pH ones do the reverse.
Where a warm cast comes from water minerals rather than from the hair itself, holding those metals in solution is what removes it.
A sugar alcohol that binds water and gives a light, non-sticky moisturised feel.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
High-porosity hair loses water fast; a humectant holds some of it in place for longer than the wash itself would.
Binds water into the outer layers of the strand, and water is what makes dry hair flexible again rather than brittle.
A humectant moves water in whichever direction the air allows: it holds moisture in humid conditions and can pull it back out of hair in very dry ones.
A light oil with very long fatty-acid chains, used as a plant alternative to silicone shine.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Coats the surface and slows water leaving the strand, which is usually what coarse hair that dries out fast is missing.
A thin oil layer lowers friction between strands and flattens the raised cuticle that scatters light and catches on its neighbours.
A light, widely used oil that softens without much weight.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Coats the surface and slows water leaving the strand, which is usually what coarse hair that dries out fast is missing.
A thin oil layer lowers friction between strands and flattens the raised cuticle that scatters light and catches on its neighbours.
A very mild sugar-derived cleanser, often used to boost the foam of other gentle surfactants.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Mild cleansing leaves more surface lubrication in place on hair that dries out quickly.
A sugar-derived non-ionic detergent, among the gentlest in use. It cleanses with little foam of its own and little sebum removal.
Gentle cleansing leaves water-insoluble deposits largely in place; they come off with a stronger wash, not this one.
A synthetic film-forming polymer. Polymers of this kind dry to a continuous film on the hair, which is how a styling product holds a shape.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A set polymer film is a physical barrier to humidity, so a style keeps its shape longer in damp conditions.
Synthetic film formers dry into a continuous film, which is what holds a shape against movement and against humid air.
Some acrylate copolymers rinse with water and some need a detergent; the label alone does not say which one a formula used.
The oil pressed from Nigella Sativa. How much weight a plant oil leaves depends on the hair it lands on; coarse hair tends to take more of it than fine hair.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Coats the surface and slows water leaving the strand, which is usually what coarse hair that dries out fast is missing.
A thin oil layer lowers friction between strands and flattens the raised cuticle that scatters light and catches on its neighbours.
A plant-oil wax used as a vegan alternative to beeswax for hold and sheen.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Emollients fill and smooth the surface of the strand, which lowers the friction that lifts the cuticle and reads as roughness.
A wax holds by staying solid on the strand, which gives grip and separation rather than a set film that cracks.
How rigid the finish is depends on which polymer it is and what the formula pairs with it, not on there being one.
A conditioning agent that binds to hair and is also used to help shield it from sun exposure.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A cationic conditioning agent: it binds to the damaged, negatively charged parts of the cuticle and lowers combing friction there.
Sunlight oxidises hair pigment, and on gray, silver or lightened hair that shows up as yellowing. A UV filter on the label absorbs some of the light that drives it.
The class that does the detangling in a conditioner. It deposits lubrication where the cuticle is worn.
A fine mineral powder that absorbs oil and adds grip. It is what makes texture powders and matte pastes feel dry to the touch.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A dry powder takes up oil and adds friction between strands, which is most of what root lift in fine hair actually is.
A buffering salt that keeps pH stable as the product ages.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
pH adjusters are how a formula is brought to a chosen acidity, and an acidic formula keeps the cuticle lying flatter than an alkaline one. Which way this one moves the pH depends on the formula, and the finished pH is not on the label.
A treated silica powder that thickens oils and gives a dry, matte feel.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A dry powder takes up oil and adds friction between strands, which is most of what root lift in fine hair actually is.
A buffering salt used to hold the formula at a steady pH.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
pH adjusters are how a formula is brought to a chosen acidity, and an acidic formula keeps the cuticle lying flatter than an alkaline one. Which way this one moves the pH depends on the formula, and the finished pH is not on the label.
A general plant protein blend used for strength and body; the silanetriol form binds more firmly.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Filling surface gaps evens out the cuticle, which is part of what makes damaged hair comb and reflect light more like undamaged hair.
Film formers are what hold a style: they dry into a connected film across the strands so the shape resists movement.
Hydrolysed fragments are small enough to sit in the gaps of a worn cuticle for a wash or two, temporarily restoring stiffness and cutting breakage in combing.
A plant-derived chelator that binds the minerals in hard water.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Binds the calcium and magnesium in hard water, which is what stops mineral deposits accumulating on the strand wash after wash.
Copper and iron carried in tap water deposit on the strand and read as a dull, warm cast on gray or light hair. A chelator holds those metals in solution so the wash carries them off.
A gentle acid that holds water and helps loosen surface build-up. It also binds a little hard-water mineral.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Binds the calcium and magnesium in hard water, which is what stops mineral deposits accumulating on the strand wash after wash.
High-porosity hair loses water fast; a humectant holds some of it in place for longer than the wash itself would.
Copper and iron carried in tap water deposit on the strand and read as a dull, warm cast on gray or light hair. A chelator holds those metals in solution so the wash carries them off.
A mineral salt used in trace amounts to stabilise the formula.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Binds the calcium and magnesium in hard water, which is what stops mineral deposits accumulating on the strand wash after wash.
Copper and iron carried in tap water deposit on the strand and read as a dull, warm cast on gray or light hair. A chelator holds those metals in solution so the wash carries them off.
A strong base used in trace amounts to set pH; it is fully neutralised in the finished product.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
pH adjusters are how a formula is brought to a chosen acidity, and an acidic formula keeps the cuticle lying flatter than an alkaline one. Which way this one moves the pH depends on the formula, and the finished pH is not on the label.
A citrus-smelling fragrance component that EU rules require to be named separately because some people react to it.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.
A soft floral fragrance component listed separately as a recognised allergen.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.
A floral fragrance component listed separately as a recognised contact allergen.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.
Ingredient list captured 2026-08-24. Formulas change, so check the package in your hand when an ingredient matters to you.
Price · 6.8 oz
Priced above the products that do the same job. Stores sell it above the $24 line; products that do this job typically go for about $26 at this size.
Sorted by price per ounce. Dated observations from our research, not live prices. Direct store pages, no affiliate links. We don’t sell this product.
Formula
Sold through specialty beauty stores, and 7 products that do the same job cost less. Part of what you pay for is where it is sold.
The formula score measures completeness for the job: a weighted share of the systems this product type is usually built around that we find in this list. It does not rate how well the product works or its quality, and it never compares across product types.
Does the same job, for less
Formulas that do the same things (cleanse, condition, coat or hold) for less per ounce. Scent, texture and where you buy them can still differ.
See more alternatives in the product library
These products do a similar job. We haven’t matched them to you. Find the one that fits your hair, routine and budget
Final decision
People who want maximum slip who want real detangling slip and moisture that stays in
Worth skipping for anyone sensitive to fragrance, very dry or high-damage hair, or anyone stretching time between washes
Olaplex Nº.5CURL Bond Shaper Hydrating Curl Conditioner for similar results at a lower price
We do not sell products or take placement fees. This page states what the formula and the prices show; the consultation is what matches it to a person.
Claims check
Claims are quoted from the brand. We mark a claim supported, partly supported or conflicting only when the ingredient list speaks to it. Everything else stays "stated by the brand". That isn’t a criticism: most claims can’t be checked from a label.
An unparalleled curl-centric conditioner designed to deliver superior hydration, manageability, smoothness and shine
Humectants or rich emollients sit in the first eight ingredients.
Helps hair feel hydrated.
We look at the first 10–15 ingredients and what they do in a formula, not at the marketing. If the list doesn't speak to a claim, we don't assume.
Reviewers
Themes that come up again and again in sourced reviews, written by our researchers in their own words. We don’t store or scrape star ratings.
Lightweight formula praised for not weighing down fine curly hair while still fighting frizz
reviewers with fine, curly hairReduces buildup at roots and frizz at ends when replacing heavier conditioners
stylist-recommended, fine textured curly hairEffective detangling and softening, curls come out defined after air-drying
general curly-hair reviewersA small number of reviewers report scalp irritation or itching
isolated reports, not majority
