A high-gloss, leave-in conditioner for fine-to-medium hair that moisturizes and tames frizz
Humectants or rich emollients sit in the first eight ingredients.
- Dimethicone
- Isododecane
- C15-19 Alkane
Helps hair feel hydrated.
Heat protectant / Lotion, heat-protecting
Scent:
The ingredient list declares fragrance. What it smells of is not stated, and we do not guess.
Manufacturer page: oribe.com
Personal fit
Complete the consultation to see exactly how well this product fits your hair and your goals. With 2,400+ products in our library we can match exactly the right products to you.
$49.00 one-time consultation, no subscription
Add the optional $49/year membership for unlimited adjustments for changes in weather and lifestyle.
The rest of what your plan weighs on this product.
The consultation builds your hair profile, then reads every factor in this table against it — and tells you where this product fits, or what to use instead.
Start your consultation$49.00 once, for your consultation and hair profile. No subscription, no required purchases.
Your avoid-list
Priced above most heat protectants
$10.80/oz at 5 oz — more than 84% of the 890 heat protectants , which mostly run $1.65–7.87/oz.
Great for
Maybe skip if
What the formula actually does
Each row says where it comes from: F means we derived it from this product’s own ingredient list, S means it is a claim the brand makes that the formula neither confirms nor contradicts.
The brand states a protection temperature — a label claim, not a measurement.
Middle of the range — noticeable on fine hair, light on coarse hair.
Conditioning agents are present, lower in the list.
Water-insoluble silicones or waxes: a detergent wash is what removes them.
Humectants in the working part of the formula.
No fast-drying alcohol in the list.
Fragrance is listed; it sits below the working ingredients.
Ingredients that matter
The workhorse ingredients plus anything lower down that changes a decision. These chips name what an ingredient does — they are not safety scores, and no ingredient here is rated good or bad on its own.
| Ingredient | What it does | Why it matters | Chip |
|---|---|---|---|
| WaterAqua/Water/Eau | solvent | The base everything else is dissolved in | Neutral |
| Dimethicone | silicone | Spreads heat across the strand | Buildup |
| Isododecane | solvent | The base everything else is dissolved in | Softens |
| C15-19 Alkane | emollient | Softens and smooths the strand | Softens |
| Hydrogenated Polydecene | emollient | Softens and smooths the strand | Softens |
| Propanediol | humectant | Pulls water into the hair | Moisturizes |
| Phenyl Trimethicone | silicone | Spreads heat across the strand | Buildup |
| Acrylamide/Sodium Acryloyldimethyltaurate Copolymer | film former | Lays down the film that holds a shape | Holds |
| Dimethiconol | silicone | A little heat-spreading smoothing | Buildup |
| FragranceParfum/Fragrance | fragrance | The scent | Fragrance |
| Brassica Campestris/Aleurites Fordi Oil Copolymer | wax | Adds a little grip | Buildup |
| Hydrolyzed Vegetable Protein | film former | A supporting film former | Protein |
US labelling rules put ingredients above 1% in descending order of amount; below 1% they may be listed in any order. Annotations keep three readings separate: the ingredient's general function, its role in this product type, and what its position can support.
The base of almost every rinse-off and cream hair product. It carries everything else and is normally the first ingredient on the label.
Listed in the first three ingredients, it is likely a structural part of this formula.
The most common conditioning silicone. It coats the strand for shine, slip, and frizz control, and needs a detergent (not just water) to wash out.
Listed in the first three ingredients, it is likely a structural part of this formula.
A surface film slows how quickly humidity reaches the cortex, which is what limits swelling-driven frizz in damp air.
Lays a smooth film along the cuticle, which lowers combing friction and flattens the surface irregularities that read as frizz.
Dimethicone does not disperse in water. On a routine that skips detergent it stays on the hair and accumulates wash after wash.
A fast-evaporating carrier that lets oils and polymers spread thinly, then leaves nothing behind.
Listed in the first three ingredients, it is likely a structural part of this formula.
Emollients fill and smooth the surface of the strand, which lowers the friction that lifts the cuticle and reads as roughness.
A plant-derived light alkane used as a clean-feeling silicone alternative.
Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.
Emollients fill and smooth the surface of the strand, which lowers the friction that lifts the cuticle and reads as roughness.
A synthetic light emollient used for slip that does not go rancid.
Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.
Emollients fill and smooth the surface of the strand, which lowers the friction that lifts the cuticle and reads as roughness.
A corn-derived humectant and solvent, often chosen as a lighter-feeling alternative to propylene glycol.
Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.
Light and water-binding rather than oily, so it hydrates without contributing weight.
A small water-binding solvent. It holds moisture and helps the rest of the formula spread evenly over the strand.
A humectant follows the air: it holds water in humid conditions and can give it up in very dry ones. Climate decides what it does more than the label does.
A high-refractive silicone used specifically for visible shine in serums and finishing oils.
Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.
A surface film slows how quickly humidity reaches the cortex, which is what limits swelling-driven frizz in damp air.
Lays a smooth film along the cuticle, which lowers combing friction and flattens the surface irregularities that read as frizz.
Dimethicone does not disperse in water. On a routine that skips detergent it stays on the hair and accumulates wash after wash.
A synthetic film-forming polymer. Polymers of this kind dry to a continuous film on the hair, which is how a styling product holds a shape.
Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.
A set polymer film is a physical barrier to humidity, so a style keeps its shape longer in damp conditions.
Synthetic film formers dry into a continuous film, which is what holds a shape against movement and against humid air.
Some acrylate copolymers rinse with water and some need a detergent; the label alone does not say which one a formula used.
A high-shine silicone often paired with dimethicone for a smoother, glossier finish.
Lower in the ordered portion of the list, it is more likely playing a supporting role than defining the formula.
A surface film slows how quickly humidity reaches the cortex, which is what limits swelling-driven frizz in damp air.
Lays a smooth film along the cuticle, which lowers combing friction and flattens the surface irregularities that read as frizz.
Dimethicone does not disperse in water. On a routine that skips detergent it stays on the hair and accumulates wash after wash.
An undisclosed blend of scent ingredients. Regulations let it stay unlisted, so a fragrance-free product is the only way to be certain what is not in it.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Declared fragrance. On a fragrance-sensitive routine this is the line that decides it, wherever it sits on the label.
A light, quickly evaporating carrier that spreads silicones and oils thinly, then leaves.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Emollients fill and smooth the surface of the strand, which lowers the friction that lifts the cuticle and reads as roughness.
A plant-oil wax used as a vegan alternative to beeswax for hold and sheen.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Emollients fill and smooth the surface of the strand, which lowers the friction that lifts the cuticle and reads as roughness.
A wax holds by staying solid on the strand, which gives grip and separation rather than a set film that cracks.
How rigid the finish is depends on which polymer it is and what the formula pairs with it, not on there being one.
A small water-loving molecule that draws moisture into the hair and holds it there. It is the most common softening ingredient in conditioners and leave-ins.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
High-porosity hair loses water fast; a humectant holds some of it in place for longer than the wash itself would.
Binds water into the outer layers of the strand, and water is what makes dry hair flexible again rather than brittle.
Water moves both ways. Measured across concentrations, glycerin solutions give water up in some conditions and take it from the air in others. What it does for you depends on how much of it is there and on the air around it.
The oil pressed from Cranberry (Vaccinium Macrocarpon). It is one of the lighter plant oils, absorbing faster and leaving less residue.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Coats the surface and slows water leaving the strand, which is usually what coarse hair that dries out fast is missing.
A thin oil layer lowers friction between strands and flattens the raised cuticle that scatters light and catches on its neighbours.
Provitamin B5. It draws in water and penetrates the strand a little, which is why it is the standard ingredient for softness and shine claims.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
It hydrates without adding oil or a film, which is the combination fine hair usually needs.
Deposits a lubricating layer that makes combing easier, which is most of what stops mechanical damage adding to frizz.
A humectant that also penetrates the cuticle, so it holds water inside the strand rather than only on the surface.
A rice-derived chelator that binds hard-water minerals without EDTA.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Binds the calcium and magnesium in hard water, which is what stops mineral deposits accumulating on the strand wash after wash.
Copper and iron carried in tap water deposit on the strand and read as a dull, warm cast on gray or light hair. A chelator holds those metals in solution so the wash carries them off.
A conditioning agent used for slip and smoothing in rinse-out and leave-in formulas.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A cationic conditioning agent: it binds to the damaged, negatively charged parts of the cuticle and lowers combing friction there.
The class that does the detangling in a conditioner. It deposits lubrication where the cuticle is worn.
Substantive by design. A routine with no detergent wash gives it nothing to leave with.
A general plant protein blend used for strength and body; the silanetriol form binds more firmly.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Filling surface gaps evens out the cuticle, which is part of what makes damaged hair comb and reflect light more like undamaged hair.
Film formers are what hold a style: they dry into a connected film across the strands so the shape resists movement.
Hydrolysed fragments are small enough to sit in the gaps of a worn cuticle for a wash or two, temporarily restoring stiffness and cutting breakage in combing.
A light, quick-absorbing seed oil used where weight is a concern.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Coats the surface and slows water leaving the strand, which is usually what coarse hair that dries out fast is missing.
A thin oil layer lowers friction between strands and flattens the raised cuticle that scatters light and catches on its neighbours.
A plant-derived chelator that binds the minerals in hard water.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Binds the calcium and magnesium in hard water, which is what stops mineral deposits accumulating on the strand wash after wash.
Copper and iron carried in tap water deposit on the strand and read as a dull, warm cast on gray or light hair. A chelator holds those metals in solution so the wash carries them off.
A starch fragment that soaks up oil and water, which is what puts it in dry shampoos. It also carries spray-dried plant extracts and leaves a light film.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Takes up oil at the root, which is where fine hair goes flat first.
Film formers are what hold a style: they dry into a connected film across the strands so the shape resists movement.
How rigid the finish is depends on which polymer it is and what the formula pairs with it, not on there being one.
A larch-derived polysaccharide used for a light film and moisture retention.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A polysaccharide film stays softer than a synthetic one as it dries, which is what leaves a curl defined but still able to move.
A soft film binds neighbouring strands together, which is most of what keeps flyaways lying down without stiffness.
Gum films stay soft. A style that needs firm fixation usually wants a synthetic polymer doing the holding.
A gentle acid that holds water and helps loosen surface build-up. It also binds a little hard-water mineral.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Binds the calcium and magnesium in hard water, which is what stops mineral deposits accumulating on the strand wash after wash.
High-porosity hair loses water fast; a humectant holds some of it in place for longer than the wash itself would.
Copper and iron carried in tap water deposit on the strand and read as a dull, warm cast on gray or light hair. A chelator holds those metals in solution so the wash carries them off.
A sugar that holds water unusually well, used for lasting moisture without stickiness.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
High-porosity hair loses water fast; a humectant holds some of it in place for longer than the wash itself would.
Binds water into the outer layers of the strand, and water is what makes dry hair flexible again rather than brittle.
A humectant moves water in whichever direction the air allows: it holds moisture in humid conditions and can pull it back out of hair in very dry ones.
A sugar alcohol that binds water and gives a light, non-sticky moisturised feel.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
High-porosity hair loses water fast; a humectant holds some of it in place for longer than the wash itself would.
Binds water into the outer layers of the strand, and water is what makes dry hair flexible again rather than brittle.
A humectant moves water in whichever direction the air allows: it holds moisture in humid conditions and can pull it back out of hair in very dry ones.
A very light, fast-evaporating silicone used for weightless slip.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
It leaves the hair by evaporating rather than by being washed off, so it is not part of what accumulates.
A surface film slows how quickly humidity reaches the cortex, which is what limits swelling-driven frizz in damp air.
A cyclic silicone evaporates after it has spread the formula, so it carries the other ingredients without leaving weight behind.
A very light silicone that spreads instantly and evaporates, used for slip without weight.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
It leaves the hair by evaporating rather than by being washed off, so it is not part of what accumulates.
A surface film slows how quickly humidity reaches the cortex, which is what limits swelling-driven frizz in damp air.
A cyclic silicone evaporates after it has spread the formula, so it carries the other ingredients without leaving weight behind.
A humectant that also helps preserve the formula, often used where a brand wants a short preservative list.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Light and water-binding rather than oily, so it hydrates without contributing weight.
A small water-binding solvent. It holds moisture and helps the rest of the formula spread evenly over the strand.
A humectant follows the air: it holds water in humid conditions and can give it up in very dry ones. Climate decides what it does more than the label does.
A buffering salt used to hold the formula at a steady pH.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
pH adjusters are how a formula is brought to a chosen acidity, and an acidic formula keeps the cuticle lying flatter than an alkaline one. Which way this one moves the pH depends on the formula, and the finished pH is not on the label.
A coconut-derived preservative booster that also softens.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Emollients fill and smooth the surface of the strand, which lowers the friction that lifts the cuticle and reads as roughness.
Used to bring the product to a slightly acidic pH, which helps the cuticle lie flat. It is almost always near the end of the list.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Holds hard-water minerals in solution so they rinse away instead of depositing on the hair.
The acid side of pH adjustment, and the reason it matters is measured: alkaline formulas raise the fibre's surface negative charge, increase friction between strands and lift the scales, while lower-pH ones do the reverse.
Where a warm cast comes from water minerals rather than from the hair itself, holding those metals in solution is what removes it.
A gentle preservative helper that also holds a little moisture.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Humectants bind water into the strand, and water — not oil — is what makes dry hair flexible instead of brittle.
A humectant follows the air: it holds water in humid conditions and can give it up in very dry ones. Climate decides what it does more than the label does.
A mineral salt used in trace amounts to stabilise the formula.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Binds the calcium and magnesium in hard water, which is what stops mineral deposits accumulating on the strand wash after wash.
Copper and iron carried in tap water deposit on the strand and read as a dull, warm cast on gray or light hair. A chelator holds those metals in solution so the wash carries them off.
A fragrance component with a faint balsamic scent, named separately on the label because it is a recognised contact allergen.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.
A citrus-smelling fragrance component that EU rules require to be named separately because some people react to it.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.
A floral fragrance component listed separately as a recognised contact allergen.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.
A jasmine-like fragrance component named separately as a recognised allergen.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.
A lemon-scented fragrance component listed separately as a recognised allergen.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.
Ingredient list captured 2026-08-23. Formulas change — check the package in your hand when an ingredient matters to you.
Price · 5 oz
Priced above the products that do the same job. Stores sell it above the $10 line; products that do this job typically go for about $10 at this size.
Sorted by price per ounce. Dated observations from our research, not live prices. Direct store pages, no affiliate links. We don’t sell this product.
Formula
Above the range for heat protectants per ounce for a complete formula, with no close, lower-priced match in our library.
The formula score is completeness for the job: the share of the systems this product type is normally built around that we can find in this list, weighted. It is not efficacy, not quality, and it never compares across product types.
Does the same job, for less
Same derived functions — what it cleans, conditions, coats or holds — at a lower cost per ounce. Scent, texture and where you buy it can still differ.
See more alternatives in the product library
These are functional neighbours, not personal recommendations — they are close on formula, not chosen for anyone. Get the one that fits your hair, routine, and budget

Final decision
People who blow-dry or flat-iron — for heat protection and moisture that stays in
Not ideal for anyone sensitive to fragrance, curly-method routines, or very dry or very humid climates
We do not sell products or take placement fees. This page states what the formula and the prices show; the consultation is what matches it to a person.
Claims check
Claims are quoted from the brand. We only mark one supported, partly supported, or conflicting when the ingredient list actually speaks to it; everything else stays "stated by the brand", which is not a criticism — most claims simply cannot be read off a label.
A high-gloss, leave-in conditioner for fine-to-medium hair that moisturizes and tames frizz
Humectants or rich emollients sit in the first eight ingredients.
Helps hair feel hydrated.
We look at the first 10–15 ingredients and what they do in a formula — not marketing. If the list doesn't speak to a claim, we don't assume.
Reviewers
Recurring themes our researchers wrote in their own words from sourced reviews. We do not store or scrape star ratings.
Same shine benefit as regular Supershine cream but with much less product weight; go-to shine product for fine-haired clients
Adds radiance without visible product weight; moisturizes extensions without buildup around bonds
Hydrating/nourishing, described as 'giving your hair a drink of water,' left hair really smooth - good for sleek styles