light hold
Synthetic hold polymers are present.
- Polyquaternium-37
- Polyquaternium-46
- Polyquaternium-11
Structure that lasts the day.
Styler / Mousse, light-hold
Scent:
Notes: sea salt.
Listing used for research: ulta.com
Personal fit
Complete the consultation to see exactly how well this product fits your hair and your goals. With 2,400+ products in our library we can match exactly the right products to you.
$49.00 one-time consultation, no subscription
Add the optional $49/year membership for unlimited adjustments for changes in weather and lifestyle.
The rest of what your plan weighs on this product.
The consultation builds your hair profile, then reads every factor in this table against it — and tells you where this product fits, or what to use instead.
Start your consultation$49.00 once, for your consultation and hair profile. No subscription, no required purchases.
Your avoid-list
Priced with its peers
$2.23/oz at 6.7 oz — less than 58% of the 138 mousses , which mostly run $1.54–4.12/oz. The cost less.
Great for
Maybe skip if
What the formula actually does
Each row says where it comes from: F means we derived it from this product’s own ingredient list, S means it is a claim the brand makes that the formula neither confirms nor contradicts.
A light hold, as stated by the brand.
Gums and synthetic polymers together.
Softening ingredients sit alongside the film formers, so a hard shell is unlikely.
Middle of the range — noticeable on fine hair, light on coarse hair.
No absorbent powders or starches.
Oils are present, but low enough to be a finishing touch.
No fast-drying alcohol in the list.
Nothing here needs a detergent wash to remove.
Fragrance sits in the first eight ingredients — a larger share of the formula.
Ingredients that matter
The workhorse ingredients plus anything lower down that changes a decision. These chips name what an ingredient does — they are not safety scores, and no ingredient here is rated good or bad on its own.
| Ingredient | What it does | Why it matters | Chip |
|---|---|---|---|
| Water | solvent | The base everything else is dissolved in | Neutral |
| Isopropyl Palmitate | light ester | Light slip without much weight | Softens |
| Polyquaternium-37 | conditioning agent | Conditions and softens — this is what makes it comb through | Detangles |
| Polyquaternium-46 | film former | Lays down the film that holds a shape | Detangles |
| Dicaprylyl Carbonate | light ester | Light slip without much weight | Softens |
| Fragrance | fragrance | The scent | Fragrance |
| Phenoxyethanol | preservative | Keeps the product from spoiling | Stabilizes |
| Cetrimonium Chloride | conditioning agent | Adds slip, lower in the list | Detangles |
US labelling rules put ingredients above 1% in descending order of amount; below 1% they may be listed in any order. Annotations keep three readings separate: the ingredient's general function, its role in this product type, and what its position can support.
The base of almost every rinse-off and cream hair product. It carries everything else and is normally the first ingredient on the label.
Listed in the first three ingredients, it is likely a structural part of this formula.
A light ester that spreads quickly and leaves a smooth, non-greasy feel.
Listed in the first three ingredients, it is likely a structural part of this formula.
A light emollient: it softens the surface with noticeably less weight than an oil or a butter.
Spreads thin and lowers friction between strands without the heaviness of a fixed oil.
A thickening polymer that gives creams and curl products their bounce and helps them cling to the strand.
Listed in the first three ingredients, it is likely a structural part of this formula.
Cationic polymers hold a curl loosely and stay soft, which is why they turn up in definition products rather than firm-hold ones.
A cationic polymer stays on the hair through rinsing, which is what keeps static and combing friction down after the wash.
Film formers are what hold a style: they dry into a connected film across the strands so the shape resists movement.
A conditioning hold polymer used for a soft, non-sticky set.
Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.
Cationic polymers hold a curl loosely and stay soft, which is why they turn up in definition products rather than firm-hold ones.
A cationic polymer stays on the hair through rinsing, which is what keeps static and combing friction down after the wash.
Film formers are what hold a style: they dry into a connected film across the strands so the shape resists movement.
A very light ester that spreads instantly and leaves a dry, silky finish.
Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.
A light emollient: it softens the surface with noticeably less weight than an oil or a butter.
Spreads thin and lowers friction between strands without the heaviness of a fixed oil.
An undisclosed blend of scent ingredients. Regulations let it stay unlisted, so a fragrance-free product is the only way to be certain what is not in it.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Declared fragrance. On a fragrance-sensitive routine this is the line that decides it, wherever it sits on the label.
The most common modern preservative; it keeps the product free of bacteria and mould. It sits well below 1% of the formula.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A quick-acting conditioning agent that reduces static and combing force. It also helps keep the formula stable.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
The C16 quat binds mostly by charge rather than by chain, so it deposits measurably less than the C22 ones. Less deposit is less conditioning and also less weight, which is usually the trade fine hair wants.
A cationic conditioning agent: it binds to the damaged, negatively charged parts of the cuticle and lowers combing friction there.
Substantive by design. A routine with no detergent wash gives it nothing to leave with.
A styling and conditioning polymer that adds light hold and shine, common in mousses and setting sprays.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Cationic polymers hold a curl loosely and stay soft, which is why they turn up in definition products rather than firm-hold ones.
A cationic polymer stays on the hair through rinsing, which is what keeps static and combing friction down after the wash.
Film formers are what hold a style: they dry into a connected film across the strands so the shape resists movement.
A cellulose thickener that gives gels and conditioners their body and adds a soft, flexible film.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A polysaccharide film stays softer than a synthetic one as it dries, which is what leaves a curl defined but still able to move.
A soft film binds neighbouring strands together, which is most of what keeps flyaways lying down without stiffness.
Gum films stay soft. A style that needs firm fixation usually wants a synthetic polymer doing the holding.
A mild sugar-derived cleanser with a soft, low lather.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Mild cleansing leaves more surface lubrication in place on hair that dries out quickly.
A sugar-derived non-ionic detergent, among the gentlest in use. It cleanses with little foam of its own and little sebum removal.
Gentle cleansing leaves water-insoluble deposits largely in place; they come off with a stronger wash, not this one.
A preservative booster that also adds a little softness. Almost always paired with phenoxyethanol.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Emollients fill and smooth the surface of the strand, which lowers the friction that lifts the cuticle and reads as roughness.
Grabs metal ions from hard water so they cannot dull the hair or destabilise the formula.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Binds the calcium and magnesium in hard water, which is what stops mineral deposits accumulating on the strand wash after wash.
Copper and iron carried in tap water deposit on the strand and read as a dull, warm cast on gray or light hair. A chelator holds those metals in solution so the wash carries them off.
A base used in trace amounts to neutralise acidic hold polymers so they thicken and set properly.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
pH adjusters are how a formula is brought to a chosen acidity, and an acidic formula keeps the cuticle lying flatter than an alkaline one. Which way this one moves the pH depends on the formula, and the finished pH is not on the label.
A rich oil used in masks and heavier creams for softness on coarse or dry hair.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Coats the surface and slows water leaving the strand, which is usually what coarse hair that dries out fast is missing.
A thin oil layer lowers friction between strands and flattens the raised cuticle that scatters light and catches on its neighbours.
A plant butter that is slightly lighter than shea, used in curl creams.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Coarse, porous hair loses water quickly and can carry the weight; a butter slows that loss more than a thin oil does.
Emollients fill and smooth the surface of the strand, which lowers the friction that lifts the cuticle and reads as roughness.
A solid fat melts onto the strand at body temperature and stays there, which is the heaviest surface moisture-holding a formula can offer.
A thick, tacky oil used for sealing ends and for slick, held-down styles.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Coats the surface and slows water leaving the strand, which is usually what coarse hair that dries out fast is missing.
A thin oil layer lowers friction between strands and flattens the raised cuticle that scatters light and catches on its neighbours.
A light, widely used oil that softens without much weight.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Coats the surface and slows water leaving the strand, which is usually what coarse hair that dries out fast is missing.
A thin oil layer lowers friction between strands and flattens the raised cuticle that scatters light and catches on its neighbours.
A light, refined coconut-derived oil that spreads easily and does not go rancid. It gives slip without a heavy feel.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A light emollient: it softens the surface with noticeably less weight than an oil or a butter.
Spreads thin and lowers friction between strands without the heaviness of a fixed oil.
A light plant-derived ester used as a silicone alternative for slip and a dry, smooth finish.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A light emollient: it softens the surface with noticeably less weight than an oil or a butter.
Spreads thin and lowers friction between strands without the heaviness of a fixed oil.
A seaweed gum used to thicken and stabilise a formula.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Gums thicken and set soft, which gives definition that bends rather than a rigid cast.
A seaweed gum that thickens and adds slip.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Gums thicken and set soft, which gives definition that bends rather than a rigid cast.
A fermented sugar gum that thickens water-based formulas and adds soft, natural hold.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A polysaccharide film stays softer than a synthetic one as it dries, which is what leaves a curl defined but still able to move.
A soft film binds neighbouring strands together, which is most of what keeps flyaways lying down without stiffness.
Gum films stay soft. A style that needs firm fixation usually wants a synthetic polymer doing the holding.
A shellfish- or fungus-derived polymer that forms a light, positively charged film for body and hold.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Cationic polymers hold a curl loosely and stay soft, which is why they turn up in definition products rather than firm-hold ones.
A cationic polymer stays on the hair through rinsing, which is what keeps static and combing friction down after the wash.
Film formers are what hold a style: they dry into a connected film across the strands so the shape resists movement.
A conditioning agent that binds to hair and is also used to help shield it from sun exposure.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A cationic conditioning agent: it binds to the damaged, negatively charged parts of the cuticle and lowers combing friction there.
Sunlight oxidises hair pigment, and on gray, silver or lightened hair that shows up as yellowing. A UV filter on the label absorbs some of the light that drives it.
The class that does the detangling in a conditioner. It deposits lubrication where the cuticle is worn.
A conditioning polymer made from guar bean gum. It deposits during rinsing, which is why sulfate shampoos can still leave hair soft.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Gums thicken and set soft, which gives definition that bends rather than a rigid cast.
Cationic conditioners bind to the negatively charged damaged cuticle, laying it flat and cutting the friction that causes combing breakage.
A styling polymer dries into a film across the strands, which is what makes a shape hold instead of relax.
A plant-derived polymer that forms a light film and helps hold a style without a stiff feel.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Emollients fill and smooth the surface of the strand, which lowers the friction that lifts the cuticle and reads as roughness.
Film formers are what hold a style: they dry into a connected film across the strands so the shape resists movement.
How rigid the finish is depends on which polymer it is and what the formula pairs with it, not on there being one.
A sugar-derived, low-foaming cleanser used in gentle and curly-method shampoos.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Mild cleansing leaves more surface lubrication in place on hair that dries out quickly.
A sugar-derived non-ionic detergent, among the gentlest in use. It cleanses with little foam of its own and little sebum removal.
Gentle cleansing leaves water-insoluble deposits largely in place; they come off with a stronger wash, not this one.
Ingredient list captured 2026-08-26. Formulas change — check the package in your hand when an ingredient matters to you.
Price · 6.7 oz
Priced above the products that do the same job. Stores sell it above the $12 line; products that do this job typically go for about $20 at this size.
Sorted by price per ounce. Dated observations from our research, not live prices. Direct store pages, no affiliate links. We don’t sell this product.
Formula
The formula carries the systems a mouss is built around, and it sits in the middle of the range for mousses per ounce.
The formula score is completeness for the job: the share of the systems this product type is normally built around that we can find in this list, weighted. It is not efficacy, not quality, and it never compares across product types.
Does the same job, for less
Same derived functions — what it cleans, conditions, coats or holds — at a lower cost per ounce. Scent, texture and where you buy it can still differ.
See more alternatives in the product library
These are functional neighbours, not personal recommendations — they are close on formula, not chosen for anyone. Get the one that fits your hair, routine, and budget



Final decision
Hair that stiffens on protein — for a protein-free formula and real detangling slip
Worth skipping for anyone sensitive to fragrance or styles that have to hold all day
Aussie Instant Freeze Gel, for similar results at a lower price
We do not sell products or take placement fees. This page states what the formula and the prices show; the consultation is what matches it to a person.
Claims check
Claims are quoted from the brand. We only mark one supported, partly supported, or conflicting when the ingredient list actually speaks to it; everything else stays "stated by the brand", which is not a criticism — most claims simply cannot be read off a label.
light hold
Synthetic hold polymers are present.
Structure that lasts the day.
wave encouraging and texture building
This is a marketing claim; an ingredient list cannot speak to it.
—
Can’t be confirmed from label.
non-sticky liquid-to-foam application
This is a marketing claim; an ingredient list cannot speak to it.
—
Can’t be confirmed from label.
heat-free styling option
This is a marketing claim; an ingredient list cannot speak to it.
—
Can’t be confirmed from label.
designed for damp hair
This is a marketing claim; an ingredient list cannot speak to it.
—
Can’t be confirmed from label.
We look at the first 10–15 ingredients and what they do in a formula — not marketing. If the list doesn't speak to a claim, we don't assume.
Reviewers
Recurring themes our researchers wrote in their own words from sourced reviews. We do not store or scrape star ratings.
A short-haired, fine straight-haired reviewer says the mousse gives towel-dried hair separated, piecey, beachier ends without unwanted bulk.
fine straight chin-length hair air-dried after one pumpA thick, low-porosity 2b wavy-haired reviewer says it held waves after scrunching and brief diffusing without residue or crunchiness.
2b, thick, low-porosity wavy hairOne reviewer reports the pump stopped producing foam while the bottles were half full and left their hands sticky.
two-bottle packaging failure report