Seals 96% of split ends and reduces breakage by 69%
A brand-run study. We report it as stated and do not repeat the number as fact.
—
Only the brand’s testing shows this.
Leave-in / Rich leave-in, heavy
Scent:
Notes: herbal.
Manufacturer page: igkhair.com
Personal fit
Complete the consultation to see exactly how well this product fits your hair and your goals. With 2,400+ products in our library we can match exactly the right products to you.
$49.00 one-time consultation, no subscription
Add the optional $49/year membership for unlimited adjustments for changes in weather and lifestyle.
The rest of what your plan weighs on this product.
The consultation builds your hair profile, then reads every factor in this table against it — and tells you where this product fits, or what to use instead.
Start your consultation$49.00 once, for your consultation and hair profile. No subscription, no required purchases.
Your avoid-list
Not enough priced leave-ins to place it
We have not priced enough leave-ins to place this one.
Great for
Maybe skip if
What the formula actually does
Each row says where it comes from: F means we derived it from this product’s own ingredient list, S means it is a claim the brand makes that the formula neither confirms nor contradicts.
Heavy butters and waxes in the first eight ingredients.
Conditioning agents are present, lower in the list.
Humectants near the top — water-binding is a headline mechanism here.
Oils sit high in the list — a softening, coating formula.
Protein appears, low enough to be a supporting ingredient.
Water-insoluble silicones or waxes: a detergent wash is what removes them.
Fragrance is listed; it sits below the working ingredients.
Ingredients that matter
The workhorse ingredients plus anything lower down that changes a decision. These chips name what an ingredient does — they are not safety scores, and no ingredient here is rated good or bad on its own.
| Ingredient | What it does | Why it matters | Chip |
|---|---|---|---|
| WaterWater (Aqua/Eau) | solvent | The base everything else is dissolved in | Neutral |
| Persea Gratissima (Avocado) Oil | oil | Coats and softens the strand | Softens |
| Propanediol | humectant | Pulls water into the hair | Moisturizes |
| VP/VA Copolymer | film former | Lays down the film that holds a shape | Holds |
| Glycerin | humectant | Pulls water into the hair | Moisturizes |
| Phenyl Trimethicone | silicone | Smooths the cuticle and adds shine | Buildup |
| Glyceryl Stearate | emulsifier | Keeps oil and water mixed | Softens |
| Isostearyl Palmitate | light ester | Light slip without much weight | Softens |
| SR-Spider Polypeptide-1 | protein | A small amount of protein | Protein |
| Bis-4-Pca Dimethicone | silicone | A little smoothing and shine | Buildup |
| Disodium Peg-12 Dimethicone Sulfosuccinate | mild anionic cleanser | — | Buildup |
| FragranceFragrance (Parfum) | fragrance | The scent | Fragrance |
US labelling rules put ingredients above 1% in descending order of amount; below 1% they may be listed in any order. Annotations keep three readings separate: the ingredient's general function, its role in this product type, and what its position can support.
The base of almost every rinse-off and cream hair product. It carries everything else and is normally the first ingredient on the label.
Listed in the first three ingredients, it is likely a structural part of this formula.
A rich oil used in masks and heavier creams for softness on coarse or dry hair.
Listed in the first three ingredients, it is likely a structural part of this formula.
Coats the surface and slows water leaving the strand, which is usually what coarse hair that dries out fast is missing.
A thin oil layer lowers friction between strands and flattens the raised cuticle that scatters light and catches on its neighbours.
Near the top of a list an oil is weight before it is anything else, and fine hair shows that first at the roots.
A corn-derived humectant and solvent, often chosen as a lighter-feeling alternative to propylene glycol.
Listed in the first three ingredients, it is likely a structural part of this formula.
Light and water-binding rather than oily, so it hydrates without contributing weight.
A small water-binding solvent. It holds moisture and helps the rest of the formula spread evenly over the strand.
A humectant follows the air: it holds water in humid conditions and can give it up in very dry ones. Climate decides what it does more than the label does.
A hold polymer that dries to a clear film. It sets the style and washes out with water.
Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.
A set polymer film is a physical barrier to humidity, so a style keeps its shape longer in damp conditions.
Synthetic film formers dry into a continuous film, which is what holds a shape against movement and against humid air.
Some acrylate copolymers rinse with water and some need a detergent; the label alone does not say which one a formula used.
A small water-loving molecule that draws moisture into the hair and holds it there. It is the most common softening ingredient in conditioners and leave-ins.
Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.
High-porosity hair loses water fast; a humectant holds some of it in place for longer than the wash itself would.
Binds water into the outer layers of the strand, and water is what makes dry hair flexible again rather than brittle.
Water moves both ways. Measured across concentrations, glycerin solutions give water up in some conditions and take it from the air in others. What it does for you depends on how much of it is there and on the air around it.
A high-refractive silicone used specifically for visible shine in serums and finishing oils.
Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.
A surface film slows how quickly humidity reaches the cortex, which is what limits swelling-driven frizz in damp air.
Lays a smooth film along the cuticle, which lowers combing friction and flattens the surface irregularities that read as frizz.
Dimethicone does not disperse in water. On a routine that skips detergent it stays on the hair and accumulates wash after wash.
A workhorse emulsifier that holds oil and water together in a cream.
Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.
Emollients fill and smooth the surface of the strand, which lowers the friction that lifts the cuticle and reads as roughness.
A fatty ester. Esters give slip and a smooth after-feel; lighter ones read dry and silky, heavier ones read rich.
Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.
A bioengineered protein modelled on spider silk, used for a smooth, strong-feeling film.
Lower in the ordered portion of the list, it is more likely playing a supporting role than defining the formula.
Film formers are what hold a style: they dry into a connected film across the strands so the shape resists movement.
How rigid the finish is depends on which polymer it is and what the formula pairs with it, not on there being one.
Unhydrolysed protein is too large to enter the strand. It sits on the surface, which is a coating effect rather than internal reinforcement.
The oil pressed from Plukenetia Volubilis. How much weight a plant oil leaves depends on the hair it lands on; coarse hair tends to take more of it than fine hair.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Coats the surface and slows water leaving the strand, which is usually what coarse hair that dries out fast is missing.
A thin oil layer lowers friction between strands and flattens the raised cuticle that scatters light and catches on its neighbours.
A dry-feeling ester used for a silky, non-greasy finish - a common silicone substitute.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A light emollient: it softens the surface with noticeably less weight than an oil or a butter.
Spreads thin and lowers friction between strands without the heaviness of a fixed oil.
A classic hairspray polymer. It gives firm hold but attracts moisture, so humidity can soften the set.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Synthetic film formers dry into a continuous film, which is what holds a shape against movement and against humid air.
Some acrylate copolymers rinse with water and some need a detergent; the label alone does not say which one a formula used.
It sets firm on its own. Whether the curl stays flexible depends on the plasticisers and oils the rest of the formula carries.
A light humectant and carrier that helps extracts dissolve.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Light and water-binding rather than oily, so it hydrates without contributing weight.
A small water-binding solvent. It holds moisture and helps the rest of the formula spread evenly over the strand.
A humectant follows the air: it holds water in humid conditions and can give it up in very dry ones. Climate decides what it does more than the label does.
A preservative booster that also adds a little softness. Almost always paired with phenoxyethanol.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Emollients fill and smooth the surface of the strand, which lowers the friction that lifts the cuticle and reads as roughness.
A strong base used in trace amounts to raise pH; fully neutralised in the finished product.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
The alkali half of a pH-adjusting pair, used in small amounts to bring a formula up to its target rather than to make it alkaline. Alkaline conditions raise the fibre's surface charge and lift the scales — but the finished pH is not on the label.
A styling polymer used for hold with a light, non-tacky feel.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Cationic polymers hold a curl loosely and stay soft, which is why they turn up in definition products rather than firm-hold ones.
A cationic polymer stays on the hair through rinsing, which is what keeps static and combing friction down after the wash.
Film formers are what hold a style: they dry into a connected film across the strands so the shape resists movement.
A base used in trace amounts to neutralise acidic hold polymers so they thicken and set properly.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
pH adjusters are how a formula is brought to a chosen acidity, and an acidic formula keeps the cuticle lying flatter than an alkaline one. Which way this one moves the pH depends on the formula, and the finished pH is not on the label.
A light conditioning agent common in sprays and leave-ins where weight matters.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A cationic conditioning agent: it binds to the damaged, negatively charged parts of the cuticle and lowers combing friction there.
The class that does the detangling in a conditioner. It deposits lubrication where the cuticle is worn.
Substantive by design. A routine with no detergent wash gives it nothing to leave with.
A preservative booster that also holds a little moisture and helps other ingredients dissolve.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Light and water-binding rather than oily, so it hydrates without contributing weight.
A small water-binding solvent. It holds moisture and helps the rest of the formula spread evenly over the strand.
A humectant follows the air: it holds water in humid conditions and can give it up in very dry ones. Climate decides what it does more than the label does.
A gentle preservative helper that also holds a little moisture.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Humectants bind water into the strand, and water — not oil — is what makes dry hair flexible instead of brittle.
A humectant follows the air: it holds water in humid conditions and can give it up in very dry ones. Climate decides what it does more than the label does.
A silicone. Silicones coat the strand for slip, shine and frizz control; unless the name carries PEG or PPG, removing one takes a detergent rather than water.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A surface film slows how quickly humidity reaches the cortex, which is what limits swelling-driven frizz in damp air.
Lays a smooth film along the cuticle, which lowers combing friction and flattens the surface irregularities that read as frizz.
A fatty ester. Esters give slip and a smooth after-feel; lighter ones read dry and silky, heavier ones read rich.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
The PEG- and PPG-modified silicones disperse in water, so ordinary washing carries them off instead of leaving a film to accumulate.
A surface film slows how quickly humidity reaches the cortex, which is what limits swelling-driven frizz in damp air.
Delivers the slip and surface smoothing of a silicone without needing a detergent wash to remove it afterwards.
A gel-forming thickener that also keeps oils suspended. It contributes a little hold.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A set polymer film is a physical barrier to humidity, so a style keeps its shape longer in damp conditions.
Synthetic film formers dry into a continuous film, which is what holds a shape against movement and against humid air.
Some acrylate copolymers rinse with water and some need a detergent; the label alone does not say which one a formula used.
An undisclosed blend of scent ingredients. Regulations let it stay unlisted, so a fragrance-free product is the only way to be certain what is not in it.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Declared fragrance. On a fragrance-sensitive routine this is the line that decides it, wherever it sits on the label.
Ingredient list captured 2026-08-23. Formulas change — check the package in your hand when an ingredient matters to you.
Price
Sorted by price per ounce. Dated observations from our research, not live prices. Direct store pages, no affiliate links. We don’t sell this product.
Formula
Too few comparable prices in our library to place this one; that is a gap in our data, not a fact about the product.
The formula score is completeness for the job: the share of the systems this product type is normally built around that we can find in this list, weighted. It is not efficacy, not quality, and it never compares across product types.
Does the same job
Same derived functions — what it cleans, conditions, coats or holds — at a lower cost per ounce. Scent, texture and where you buy it can still differ.
See more alternatives in the product library
These are functional neighbours, not personal recommendations — they are close on formula, not chosen for anyone. Get the one that fits your hair, routine, and budget

Final decision
Hair that craves moisture, looking for moisture that stays in and defined, clumped curls
Worth skipping for anyone sensitive to fragrance, curly-method routines, or oily scalps and fine hair
Nothing in our library matches it closely at a lower price.
We do not sell products or take placement fees. This page states what the formula and the prices show; the consultation is what matches it to a person.
Claims check
Claims are quoted from the brand. We only mark one supported, partly supported, or conflicting when the ingredient list actually speaks to it; everything else stays "stated by the brand", which is not a criticism — most claims simply cannot be read off a label.
Seals 96% of split ends and reduces breakage by 69%
A brand-run study. We report it as stated and do not repeat the number as fact.
—
Only the brand’s testing shows this.
Next-Generation leave-in treatment repairs damage and styles without heat
Protein or ceramides are present, but low enough that this reads as support, not treatment.
Supports the surface, not a treatment.
Softens and adds shine with 24-hour frizz control
Silicones or film formers smooth the cuticle, which is the usual mechanism.
Smoother strands, less frizz.
We look at the first 10–15 ingredients and what they do in a formula — not marketing. If the list doesn't speak to a claim, we don't assume.
Reviewers
Recurring themes our researchers wrote in their own words from sourced reviews. We do not store or scrape star ratings.
Eliminates air-dry frizz, praised for sealing visible split ends
One report of hair feeling very stiff after drying
A minority report no visible effect on long, fine, or wavy hair
long/fine/wavy hair