Hydrate + Restore Honey Sulfate-Free Conditioner

US labelling rules put ingredients above 1% in descending order of amount; below 1% they may be listed in any order. Annotations keep three readings separate: the ingredient's general function, its role in this product type, and what its position can support.

• 1 Water
  General function

  The base of almost every rinse-off and cream hair product. It carries everything else and is normally the first ingredient on the label.

  Leading ingredient

  Listed in the first three ingredients, it is likely a structural part of this formula.

  • solvent
• 2 Stearyl Alcohol
  General function

  A fatty alcohol that thickens conditioners and helps them coat the hair evenly.

  Leading ingredient

  Listed in the first three ingredients, it is likely a structural part of this formula.

  May suitDry, coarse, or high-porosity hair

  The waxy solid that gives a conditioner its body. It deposits a soft lubricating layer, which is most of what makes hair feel smooth after rinsing.

  May suitFrizz-prone, damaged, or high-friction hair

  Deposits with the cationic conditioners and helps them lie flat along the strand, which is where the detangling actually comes from.

  DependsFine or easily flattened hair

  Near the top of a conditioner it is doing most of the conditioning, and most of the weighting, at the same time.

  PubChem
  • fatty alcohol
  • emollient
  • thickener
• 3 Behentrimonium Chloride
  General function

  A positively charged conditioning agent that binds to damaged, negatively charged spots on the hair. It is the main detangling ingredient in most rinse-out conditioners.

  Leading ingredient

  Listed in the first three ingredients, it is likely a structural part of this formula.

  May suitDry, coarse, or high-porosity hair

  Electrokinetic measurement puts the C22 quat ahead of the C16 ones for deposition: the longer chain adds van der Waals stabilisation on top of the charge binding. That extra deposit is what coarse hair usually needs to comb through.

  May suitFrizz-prone, damaged, or high-friction hair

  A cationic conditioning agent: it binds to the damaged, negatively charged parts of the cuticle and lowers combing friction there.

  DependsBuild-up-sensitive routines

  Substantive by design. A routine with no detergent wash gives it nothing to leave with.

  International Journal of Cosmetic Science
  • conditioning agent
  • cleanser
• 4 Bisaminopropyl Dimethicone
  General function

  A silicone. Silicones coat the strand for slip, shine and frizz control; unless the name carries PEG or PPG, removing one takes a detergent rather than water.

  Supporting ingredient

  Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.

  • silicone
  • conditioning agent
• 5 Cetyl Alcohol
  General function

  A fatty alcohol used to thicken creams and add slip. It softens rather than dries.

  Supporting ingredient

  Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.

  May suitDry, coarse, or high-porosity hair

  The waxy solid that gives a conditioner its body. It deposits a soft lubricating layer, which is most of what makes hair feel smooth after rinsing.

  May suitFrizz-prone, damaged, or high-friction hair

  Deposits with the cationic conditioners and helps them lie flat along the strand, which is where the detangling actually comes from.

  DependsFine or easily flattened hair

  Near the top of a conditioner it is doing most of the conditioning, and most of the weighting, at the same time.

  PubChem
  • fatty alcohol
  • emollient
  • thickener
• 6 Camellia Oleifera Seed Oil
  General function

  Tea seed oil - light, fast-absorbing, used for shine on fine hair.

  Supporting ingredient

  Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.

  May suitDry, coarse, or high-porosity hair

  Coats the surface and slows water leaving the strand, which is usually what coarse hair that dries out fast is missing.

  May suitFrizz-prone, damaged, or high-friction hair

  A thin oil layer lowers friction between strands and flattens the raised cuticle that scatters light and catches on its neighbours.

  May not suitFine or easily flattened hair

  Near the top of a list an oil is weight before it is anything else, and fine hair shows that first at the roots.

  • oil
  • emollient
• 7 Aloe Barbadensis Leaf Juice
  General function

  Aloe gel, used for light moisture and slip. High in the list it also contributes a little natural hold.

  Supporting ingredient

  Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.

  May suitCurls or waves needing flexible hold

  Gums thicken and set soft, which gives definition that bends rather than a rigid cast.

  May suitFine or easily flattened hair

  Hydration with no oil attached, so it adds very little weight even high on a list.

  May suitVery dry or highly damaged hair

  Aloe is mostly water carrying sugars that bind more of it, which is why it turns up as the base of moisture-first formulas.

  • humectant
  • botanical extract
  • gum
• 8 Honey · Honey Extract
  General function

  A natural sugar-based humectant that holds water against the strand.

  Supporting ingredient

  Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.

  May suitFine or easily flattened hair

  Hydration with no oil attached, so it adds very little weight even high on a list.

  May suitVery dry or highly damaged hair

  Aloe is mostly water carrying sugars that bind more of it, which is why it turns up as the base of moisture-first formulas.

  DependsClimate-sensitive or frizz-prone hair

  A humectant follows the air: it holds water in humid conditions and can give it up in very dry ones. Climate decides what it does more than the label does.

  • humectant
  • botanical extract
• 9 Histidine
  General function

  One of the amino acids that make up hair protein, added for moisture binding.

  Secondary ingredient

  Lower in the ordered portion of the list, it is more likely playing a supporting role than defining the formula.

  May suitVery dry or highly damaged hair

  Amino acids are the smallest protein fraction and bind water as well, so they add far less stiffness than a hydrolysed protein does.

  DependsProtein-sensitive hair

  The lightest option in the protein family, but still protein — worth watching if protein reliably stiffens your hair.

  PubChem
  • amino acid
• ▾Below about this point, order stops being meaningful — these are typically used at 1% or less.
• 10 Fragrance
  General function

  An undisclosed blend of scent ingredients. Regulations let it stay unlisted, so a fragrance-free product is the only way to be certain what is not in it.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May not suitFragrance-sensitive routines

  Declared fragrance. On a fragrance-sensitive routine this is the line that decides it, wherever it sits on the label.

  • fragrance
  • declared fragrance
• 11 Phenoxyethanol
  • preservative
• 12 Benzyl Alcohol
  • preservative
  • solvent
• 13 Sodium Benzoate
  • preservative
• 14 Disodium EDTA
  General function

  Grabs metal ions from hard water so they cannot dull the hair or destabilise the formula.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May suitBuild-up-sensitive routines

  Binds the calcium and magnesium in hard water, which is what stops mineral deposits accumulating on the strand wash after wash.

  May suitGray, silver, or brass-prone hair

  Copper and iron carried in tap water deposit on the strand and read as a dull, warm cast on gray or light hair. A chelator holds those metals in solution so the wash carries them off.

  PubChem
  • hard-water chelator
• 15 Citric Acid
  General function

  Used to bring the product to a slightly acidic pH, which helps the cuticle lie flat. It is almost always near the end of the list.

  Estimated lower-concentration zone

  It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.

  May suitBuild-up-sensitive routines

  Holds hard-water minerals in solution so they rinse away instead of depositing on the hair.

  May suitFrizz-prone, damaged, or high-friction hair

  The acid side of pH adjustment, and the reason it matters is measured: alkaline formulas raise the fibre's surface negative charge, increase friction between strands and lift the scales, while lower-pH ones do the reverse.

  May suitGray, silver, or brass-prone hair

  Where a warm cast comes from water minerals rather than from the hair itself, holding those metals in solution is what removes it.

  International Journal of Trichology
  • pH adjuster
  • hard-water chelator
• 16 Polysorbate 20
  • solubilizer
  • emulsifier

What the whole list adds up to

• 3 emollients
• 3 preservatives
• 2 solvents
• 2 fatty alcohols
• 2 thickeners
• 2 humectants
• 2 botanical extracts
• 2 hard-water chelators
• 1 conditioning agent
• 1 cleanser
• 1 silicone
• 1 conditioning agent
• 1 oil
• 1 gum

Ingredient list captured 2026-08-21. Formulas change — check the package in your hand when an ingredient matters to you.