Up to 72 hours humidity resistance
Humidity resistance is measured in a lab, not read off a label; film formers can help.
- VP/VA Copolymer
- Cyclopentasiloxane
- Peg/Ppg-18/18 Dimethicone
May help, but not measurable here.
Styler / Texture spray, medium-hold
Scent:
The ingredient list declares fragrance. What it smells of is not stated, and we do not guess.
Manufacturer page: sexyhair.com
Personal fit
Complete the consultation to see exactly how well this product fits your hair and your goals. With 2,400+ products in our library we can match exactly the right products to you.
$49.00 one-time consultation, no subscription
Add the optional $49/year membership for unlimited adjustments for changes in weather and lifestyle.
The rest of what your plan weighs on this product.
The consultation builds your hair profile, then reads every factor in this table against it — and tells you where this product fits, or what to use instead.
Start your consultation$49.00 once, for your consultation and hair profile. No subscription, no required purchases.
Your avoid-list
Priced with its peers
$4.68/oz at 4.8 oz — less than 53% of the 58 texture sprays , which mostly run $3.32–5.98/oz.
Great for
Maybe skip if
What the formula actually does
Each row says where it comes from: F means we derived it from this product’s own ingredient list, S means it is a claim the brand makes that the formula neither confirms nor contradicts.
A medium hold, as stated by the brand.
Gums and synthetic polymers together.
Softening ingredients sit alongside the film formers, so a hard shell is unlikely.
Water-first and light: unlikely to flatten fine hair.
The brand claims humidity resistance; the ingredient list cannot confirm it.
No absorbent powders or starches.
Oils are present, but low enough to be a finishing touch.
Fast-drying alcohol in the first three ingredients.
Water-insoluble silicones or waxes: a detergent wash is what removes them.
Fragrance sits in the first eight ingredients — a larger share of the formula.
Ingredients that matter
The workhorse ingredients plus anything lower down that changes a decision. These chips name what an ingredient does — they are not safety scores, and no ingredient here is rated good or bad on its own.
| Ingredient | What it does | Why it matters | Chip |
|---|---|---|---|
| Hydrofluorocarbon 152a | propellant | Pushes the product out of the can | Neutral |
| Alcohol Denat. | drying alcohol | Sets the style fast — the same reason it can read dry | Drying |
| Glycerin | humectant | Pulls water into the hair | Moisturizes |
| VP/VA Copolymer | film former | Lays down the film that holds a shape | Holds |
| Cyclopentasiloxane | silicone | Smooths the cuticle and adds shine | Buildup |
| Peg/Ppg-18/18 Dimethicone | emulsifier | Keeps oil and water mixed | Buildup |
| FragranceFragrance/Parfum | fragrance | The scent | Fragrance |
| Panthenol | humectant | Adds a little water-binding | Detangles |
| BeeswaxBeeswax/Cera Alba/Cire D'Abeille | wax | Adds a little grip | Buildup |
| Limonene | fragrance | The scent | Fragrance |
| Benzyl Benzoate | fragrance | The scent | Fragrance |
| Hydroxycitronellal | fragrance | The scent | Fragrance |
US labelling rules put ingredients above 1% in descending order of amount; below 1% they may be listed in any order. Annotations keep three readings separate: the ingredient's general function, its role in this product type, and what its position can support.
A non-flammable aerosol propellant used in dry shampoos and finishing sprays.
Listed in the first three ingredients, it is likely a structural part of this formula.
Fast-drying alcohol used to make sprays set quickly. In leave-on products it can leave hair feeling dry, especially in high position on the list.
Listed in the first three ingredients, it is likely a structural part of this formula.
Evaporates on contact, which is how a spray sets almost instantly and leaves no weight behind it.
Porous hair gives water up easily as it is; a fast-evaporating solvent high on the list accelerates that.
It evaporates quickly and takes some water with it. On hair already short of moisture, a formula built on a lot of it can finish drier than it started.
A small water-loving molecule that draws moisture into the hair and holds it there. It is the most common softening ingredient in conditioners and leave-ins.
Listed in the first three ingredients, it is likely a structural part of this formula.
High-porosity hair loses water fast; a humectant holds some of it in place for longer than the wash itself would.
Binds water into the outer layers of the strand, and water is what makes dry hair flexible again rather than brittle.
Water moves both ways. Measured across concentrations, glycerin solutions give water up in some conditions and take it from the air in others. What it does for you depends on how much of it is there and on the air around it.
A hold polymer that dries to a clear film. It sets the style and washes out with water.
Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.
A set polymer film is a physical barrier to humidity, so a style keeps its shape longer in damp conditions.
Synthetic film formers dry into a continuous film, which is what holds a shape against movement and against humid air.
Some acrylate copolymers rinse with water and some need a detergent; the label alone does not say which one a formula used.
A light, fast-evaporating silicone that spreads other ingredients then leaves. It gives serums their weightless glide.
Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.
It leaves the hair by evaporating rather than by being washed off, so it is not part of what accumulates.
A surface film slows how quickly humidity reaches the cortex, which is what limits swelling-driven frizz in damp air.
A cyclic silicone evaporates after it has spread the formula, so it carries the other ingredients without leaving weight behind.
An ethoxylated or propoxylated formulation aid. Ingredients of this family keep oils, silicones and fragrance evenly dispersed in a water-based product.
Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.
The PEG- and PPG-modified silicones disperse in water, so ordinary washing carries them off instead of leaving a film to accumulate.
A surface film slows how quickly humidity reaches the cortex, which is what limits swelling-driven frizz in damp air.
Delivers the slip and surface smoothing of a silicone without needing a detergent wash to remove it afterwards.
An undisclosed blend of scent ingredients. Regulations let it stay unlisted, so a fragrance-free product is the only way to be certain what is not in it.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Declared fragrance. On a fragrance-sensitive routine this is the line that decides it, wherever it sits on the label.
Provitamin B5. It draws in water and penetrates the strand a little, which is why it is the standard ingredient for softness and shine claims.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
It hydrates without adding oil or a film, which is the combination fine hair usually needs.
Deposits a lubricating layer that makes combing easier, which is most of what stops mechanical damage adding to frizz.
A humectant that also penetrates the cuticle, so it holds water inside the strand rather than only on the surface.
A light oil rich in fatty acids, used in scalp and dry-hair treatments.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Coats the surface and slows water leaving the strand, which is usually what coarse hair that dries out fast is missing.
A thin oil layer lowers friction between strands and flattens the raised cuticle that scatters light and catches on its neighbours.
Aloe gel, used for light moisture and slip. High in the list it also contributes a little natural hold.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Gums thicken and set soft, which gives definition that bends rather than a rigid cast.
Hydration with no oil attached, so it adds very little weight even high on a list.
Aloe is mostly water carrying sugars that bind more of it, which is why it turns up as the base of moisture-first formulas.
A firm natural wax that grips and holds hair in place. It resists water and can take repeated washing to remove.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A wax holds by staying solid on the strand, which gives grip and separation rather than a set film that cracks.
Forms a physical barrier on the strand that slows water leaving it. Nothing else in a formula holds moisture in as bluntly.
How rigid the finish is depends on which polymer it is and what the formula pairs with it, not on there being one.
A citrus-smelling fragrance component that EU rules require to be named separately because some people react to it.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.
A fragrance component with a faint balsamic scent, named separately on the label because it is a recognised contact allergen.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.
A soft floral fragrance component named separately as a recognised allergen.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.
Ingredient list captured 2026-08-27. Formulas change — check the package in your hand when an ingredient matters to you.
Price · 4.8 oz
Usually a good value. Most stores sell it under the $26 line, and products that do this job typically go for about $38 at this size.
4.8 ozmost listedBest per ounce
Sorted by price per ounce. Dated observations from our research, not live prices. Direct store pages, no affiliate links. We don’t sell this product.
Formula
Both the formula and the price land mid-range: it covers the core of what a texture spray does and costs about what texture sprays cost per ounce.
The formula score is completeness for the job: the share of the systems this product type is normally built around that we can find in this list, weighted. It is not efficacy, not quality, and it never compares across product types.
Does the same job
Same derived functions — what it cleans, conditions, coats or holds — at a lower cost per ounce. Scent, texture and where you buy it can still differ.
See more alternatives in the product library
These are functional neighbours, not personal recommendations — they are close on formula, not chosen for anyone. Get the one that fits your hair, routine, and budget

Final decision
Hair that stiffens on protein, looking for a protein-free formula and moisture that stays in
Worth skipping for anyone sensitive to fragrance, curly-method routines, or very dry or high-damage hair
Nothing in our library matches it closely at a lower price.
We do not sell products or take placement fees. This page states what the formula and the prices show; the consultation is what matches it to a person.
Claims check
Claims are quoted from the brand. We only mark one supported, partly supported, or conflicting when the ingredient list actually speaks to it; everything else stays "stated by the brand", which is not a criticism — most claims simply cannot be read off a label.
Up to 72 hours humidity resistance
Humidity resistance is measured in a lab, not read off a label; film formers can help.
May help, but not measurable here.
Up to 48 hours lasting texture
This is a marketing claim; an ingredient list cannot speak to it.
—
Can’t be confirmed from label.
Builds texture, dimension, separation
This is a marketing claim; an ingredient list cannot speak to it.
—
Can’t be confirmed from label.
Adds volume
It reads light on the strand, which is what volume claims depend on.
Leaves room for lift.
We look at the first 10–15 ingredients and what they do in a formula — not marketing. If the list doesn't speak to a claim, we don't assume.
Reviewers
Recurring themes our researchers wrote in their own words from sourced reviews. We do not store or scrape star ratings.
Reviewers call it easy to use and lightweight, saying it doesn't weigh hair down.
Ulta reviewersPraised as good for fine or thin hair, adding texture without stiffness.
Ulta reviewers with fine hairSome reviewers with darker hair say it can leave a greasy-looking cast.
Ulta reviewers with dark hairA subset of reviewers describe the spray as sticky or heavy-feeling once applied.
Ulta reviewers