Leave-in / Rich leave-in, heavy
Scent:
The ingredient list declares fragrance. What it smells of is not stated, and we do not guess.
Listing used for research: target.com
Personal fit
Complete the consultation to see exactly how well this product fits your hair and your goals. With 2,400+ products in our library we can match exactly the right products to you.
$49.00 one-time consultation, no subscription
Add the optional $49/year membership for unlimited adjustments for changes in weather and lifestyle.
The rest of what your plan weighs on this product.
The consultation builds your hair profile, then reads every factor in this table against it — and tells you where this product fits, or what to use instead.
Start your consultation$49.00 once, for your consultation and hair profile. No subscription, no required purchases.
Your avoid-list
Lower cost than most leave-ins
$0.75/oz at 8.5 oz — less than 92% of the 481 leave-ins , which mostly run $1.17–5.55/oz.
Great for
Maybe skip if
What the formula actually does
Each row says where it comes from: F means we derived it from this product’s own ingredient list, S means it is a claim the brand makes that the formula neither confirms nor contradicts.
Heavy butters and waxes in the first eight ingredients.
Some slip, mostly from esters or silicones rather than conditioners.
Humectants in the working part of the formula.
Oils sit high in the list — a softening, coating formula.
No protein or amino acids in the list.
Water-insoluble silicones or waxes: a detergent wash is what removes them.
Fragrance is listed; it sits below the working ingredients.
Ingredients that matter
The workhorse ingredients plus anything lower down that changes a decision. These chips name what an ingredient does — they are not safety scores, and no ingredient here is rated good or bad on its own.
| Ingredient | What it does | Why it matters | Chip |
|---|---|---|---|
| WaterAqua (Water) | solvent | The base everything else is dissolved in | Neutral |
| Cocos Nucifera (Coconut) Oil | oil | Coats and softens the strand | Softens |
| Carthamus Tinctorius (Safflower) Seed Oil | oil | Coats and softens the strand | Softens |
| Ricinus Communis (Castor) Seed Oil | oil | Coats and softens the strand | Softens |
| Petrolatum | sealant | Seals moisture in | Heavy |
| Sorbitol | humectant | Pulls water into the hair | Moisturizes |
| Cyclopentasiloxane | silicone | Smooths the cuticle and adds shine | Buildup |
| Cetearyl Alcohol | fatty alcohol | Thickens and conditions — not a drying alcohol | Softens |
| Dimethicone | silicone | A little smoothing and shine | Buildup |
| Fragrance | fragrance | The scent | Fragrance |
| Alpha-Isomethyl Ionone | fragrance | The scent | Fragrance |
| Benzyl Salicylate | fragrance | The scent | Fragrance |
US labelling rules put ingredients above 1% in descending order of amount; below 1% they may be listed in any order. Annotations keep three readings separate: the ingredient's general function, its role in this product type, and what its position can support.
The base of almost every rinse-off and cream hair product. It carries everything else and is normally the first ingredient on the label.
Listed in the first three ingredients, it is likely a structural part of this formula.
One of the few oils small enough to move into the strand, which is why it is used for pre-wash treatments. It can feel heavy or stiff on protein-sensitive hair.
Listed in the first three ingredients, it is likely a structural part of this formula.
Because it penetrates rather than sits on top, it works on hair that loses water through a worn cuticle instead of only slowing evaporation from the surface the way a non-penetrating oil does.
A thin oil layer lowers friction between strands and flattens the raised cuticle that scatters light and catches on its neighbours.
The exception to the class read: lauric acid is small and linear enough to enter the shaft rather than only coat it, and in comparison testing coconut oil was the one that reduced protein loss from washing on both undamaged and damaged hair.
A light oil that softens without much residue.
Listed in the first three ingredients, it is likely a structural part of this formula.
Coats the surface and slows water leaving the strand, which is usually what coarse hair that dries out fast is missing.
A thin oil layer lowers friction between strands and flattens the raised cuticle that scatters light and catches on its neighbours.
Near the top of a list an oil is weight before it is anything else, and fine hair shows that first at the roots.
A thick, tacky oil used for sealing ends and for slick, held-down styles.
Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.
Coats the surface and slows water leaving the strand, which is usually what coarse hair that dries out fast is missing.
A thin oil layer lowers friction between strands and flattens the raised cuticle that scatters light and catches on its neighbours.
Near the top of a list an oil is weight before it is anything else, and fine hair shows that first at the roots.
A heavy sealing agent that locks moisture in and takes detergent to remove.
Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.
Emollients fill and smooth the surface of the strand, which lowers the friction that lifts the cuticle and reads as roughness.
Forms a physical barrier on the strand that slows water leaving it. Nothing else in a formula holds moisture in as bluntly.
It does not disperse in water at all: removing it means a detergent wash, and until then it stays exactly where it landed.
A sugar-based humectant that adds moisture and a slight cushiony feel.
Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.
High-porosity hair loses water fast; a humectant holds some of it in place for longer than the wash itself would.
Binds water into the outer layers of the strand, and water is what makes dry hair flexible again rather than brittle.
A humectant moves water in whichever direction the air allows: it holds moisture in humid conditions and can pull it back out of hair in very dry ones.
A light, fast-evaporating silicone that spreads other ingredients then leaves. It gives serums their weightless glide.
Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.
It leaves the hair by evaporating rather than by being washed off, so it is not part of what accumulates.
A surface film slows how quickly humidity reaches the cortex, which is what limits swelling-driven frizz in damp air.
A cyclic silicone evaporates after it has spread the formula, so it carries the other ingredients without leaving weight behind.
A waxy fatty alcohol - nothing like drying alcohol. It gives conditioners their body and leaves a soft, smoothing film on the hair.
Listed in positions 4–8, it likely makes a meaningful contribution alongside the formula's main ingredients.
The waxy solid that gives a conditioner its body. It deposits a soft lubricating layer, which is most of what makes hair feel smooth after rinsing.
Deposits with the cationic conditioners and helps them lie flat along the strand, which is where the detangling actually comes from.
Near the top of a conditioner it is doing most of the conditioning, and most of the weighting, at the same time.
The most common conditioning silicone. It coats the strand for shine, slip, and frizz control, and needs a detergent (not just water) to wash out.
Lower in the ordered portion of the list, it is more likely playing a supporting role than defining the formula.
A surface film slows how quickly humidity reaches the cortex, which is what limits swelling-driven frizz in damp air.
Lays a smooth film along the cuticle, which lowers combing friction and flattens the surface irregularities that read as frizz.
Dimethicone does not disperse in water. On a routine that skips detergent it stays on the hair and accumulates wash after wash.
A self-emulsifying version of glyceryl stearate that builds a cream on its own.
Lower in the ordered portion of the list, it is more likely playing a supporting role than defining the formula.
Emollients fill and smooth the surface of the strand, which lowers the friction that lifts the cuticle and reads as roughness.
A shine-giving emollient used in serums and finishing oils.
Lower in the ordered portion of the list, it is more likely playing a supporting role than defining the formula.
A light emollient: it softens the surface with noticeably less weight than an oil or a butter.
Spreads thin and lowers friction between strands without the heaviness of a fixed oil.
A heavy, coating oil traditionally used for deep conditioning.
Lower in the ordered portion of the list, it is more likely playing a supporting role than defining the formula.
Coats the surface and slows water leaving the strand, which is usually what coarse hair that dries out fast is missing.
A thin oil layer lowers friction between strands and flattens the raised cuticle that scatters light and catches on its neighbours.
A thickener that turns a liquid into a clear gel. It also contributes a light hold.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A set polymer film is a physical barrier to humidity, so a style keeps its shape longer in damp conditions.
Synthetic film formers dry into a continuous film, which is what holds a shape against movement and against humid air.
Some acrylate copolymers rinse with water and some need a detergent; the label alone does not say which one a formula used.
A fatty acid that thickens creams and helps them hold their texture.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
The waxy solid that gives a conditioner its body. It deposits a soft lubricating layer, which is most of what makes hair feel smooth after rinsing.
Deposits with the cationic conditioners and helps them lie flat along the strand, which is where the detangling actually comes from.
A base used in trace amounts to neutralise acidic hold polymers so they thicken and set properly.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
pH adjusters are how a formula is brought to a chosen acidity, and an acidic formula keeps the cuticle lying flatter than an alkaline one. Which way this one moves the pH depends on the formula, and the finished pH is not on the label.
Grabs metal ions from hard water so they cannot dull the hair or destabilise the formula.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Binds the calcium and magnesium in hard water, which is what stops mineral deposits accumulating on the strand wash after wash.
Copper and iron carried in tap water deposit on the strand and read as a dull, warm cast on gray or light hair. A chelator holds those metals in solution so the wash carries them off.
A light humectant and carrier that helps extracts dissolve.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Light and water-binding rather than oily, so it hydrates without contributing weight.
A small water-binding solvent. It holds moisture and helps the rest of the formula spread evenly over the strand.
A humectant follows the air: it holds water in humid conditions and can give it up in very dry ones. Climate decides what it does more than the label does.
Used to bring the product to a slightly acidic pH, which helps the cuticle lie flat. It is almost always near the end of the list.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Holds hard-water minerals in solution so they rinse away instead of depositing on the hair.
The acid side of pH adjustment, and the reason it matters is measured: alkaline formulas raise the fibre's surface negative charge, increase friction between strands and lift the scales, while lower-pH ones do the reverse.
Where a warm cast comes from water minerals rather than from the hair itself, holding those metals in solution is what removes it.
A preservative booster that also adds a little softness. Almost always paired with phenoxyethanol.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Emollients fill and smooth the surface of the strand, which lowers the friction that lifts the cuticle and reads as roughness.
A coconut-derived emulsifier that softens a cleansing base.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Emollients fill and smooth the surface of the strand, which lowers the friction that lifts the cuticle and reads as roughness.
An undisclosed blend of scent ingredients. Regulations let it stay unlisted, so a fragrance-free product is the only way to be certain what is not in it.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Declared fragrance. On a fragrance-sensitive routine this is the line that decides it, wherever it sits on the label.
A violet-like fragrance component named separately as a recognised allergen.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.
A soft floral fragrance component listed separately as a recognised allergen.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.
A floral fragrance component (lilial) named separately as a recognised allergen; increasingly reformulated out.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.
A rose-scented fragrance component, listed on its own because some people react to it.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.
A jasmine-like fragrance component named separately as a recognised allergen.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.
A citrus-smelling fragrance component that EU rules require to be named separately because some people react to it.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.
A floral fragrance component listed separately as a recognised contact allergen.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.
A certified colour used to tint the product itself, not the hair.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A violet or blue colorant sits opposite yellow on the colour wheel, so a trace of it deposited on the surface makes a warm cast read cooler. It washes out over the following few washes.
A certified colour added to tint the product itself. It does not colour hair.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A violet or blue colorant sits opposite yellow on the colour wheel, so a trace of it deposited on the surface makes a warm cast read cooler. It washes out over the following few washes.
Ingredient list captured 2026-09-04. Formulas change — check the package in your hand when an ingredient matters to you.
Price · 8.5 oz
Usually a good value. Most stores sell it under the $7 line, and products that do this job typically go for about $14 at this size.
Sorted by price per ounce. Dated observations from our research, not live prices. Direct store pages, no affiliate links. We don’t sell this product. and 3 listings we don’t count — grey-market or unverified sellers.
Formula
The formula covers the core of what a leave-in does, and it costs less per ounce than most leave-ins in our library.
The formula score is completeness for the job: the share of the systems this product type is normally built around that we can find in this list, weighted. It is not efficacy, not quality, and it never compares across product types.
Does the same job
Same derived functions — what it cleans, conditions, coats or holds — at a lower cost per ounce. Scent, texture and where you buy it can still differ.
See more alternatives in the product library
These are functional neighbours, not personal recommendations — they are close on formula, not chosen for anyone. Get the one that fits your hair, routine, and budget
Final decision
Hair that stiffens on protein — for a protein-free formula and moisture that stays in
Worth skipping for anyone sensitive to fragrance, curly-method routines, or oily scalps and fine hair
Nothing in our library matches it closely at a lower price.
We do not sell products or take placement fees. This page states what the formula and the prices show; the consultation is what matches it to a person.
Claims check
Claims are quoted from the brand. We only mark one supported, partly supported, or conflicting when the ingredient list actually speaks to it; everything else stays "stated by the brand", which is not a criticism — most claims simply cannot be read off a label.
Rich oil-blended hair moisturizer to restore and protect hair
Humectants or rich emollients sit in the first eight ingredients.
Helps hair feel hydrated.
Works great with wet or dry hair
Humectants or rich emollients sit in the first eight ingredients.
Helps hair feel hydrated.
Conditions and protects hair from high heat
This is a marketing claim; an ingredient list cannot speak to it.
—
Can’t be confirmed from label.
Provides long-lasting shine with a natural, non-greasy, non-sticky formula
The formula carries a recognised shine system — silicone, oil, or light ester.
Reflects light for visible shine.
We look at the first 10–15 ingredients and what they do in a formula — not marketing. If the list doesn't speak to a claim, we don't assume.
Reviewers
Recurring themes our researchers wrote in their own words from sourced reviews. We do not store or scrape star ratings.
Several reviewers say this lotion keeps their scalp free of dandruff while keeping hair moisturized through the day.
general reviewersReviewers describe the finish as non-greasy while still delivering lasting moisture.
general reviewersA recurring complaint is that the lotion is thick and difficult to squeeze out of the bottle.
general reviewers
