8-hour flexible hold, clinically tested
A brand-run study. We report it as stated and do not repeat the number as fact.
—
Only the brand’s testing shows this.
Styler / Hairspray, polymer-set
Scent:
The ingredient list declares fragrance. What it smells of is not stated, and we do not guess.
Listing used for research: ulta.com
Personal fit
Complete the consultation to see exactly how well this product fits your hair and your goals. With 2,400+ products in our library we can match exactly the right products to you.
$49.00 one-time consultation, no subscription
Add the optional $49/year membership for unlimited adjustments for changes in weather and lifestyle.
The rest of what your plan weighs on this product.
The consultation builds your hair profile, then reads every factor in this table against it — and tells you where this product fits, or what to use instead.
Start your consultation$49.00 once, for your consultation and hair profile. No subscription, no required purchases.
Your avoid-list
Same job for less elsewhere
$12.22/oz at 1.7 oz — more than 100% of the 95 hairsprays , which mostly run $1.75–4.31/oz.
Great for
Maybe skip if
What the formula actually does
Each row says where it comes from: F means we derived it from this product’s own ingredient list, S means it is a claim the brand makes that the formula neither confirms nor contradicts.
Synthetic hold polymers — the firmest of the hold systems.
Film formers without much softening them — expect a cast to scrunch out.
Water-first and light: unlikely to flatten fine hair.
No absorbent powders or starches.
No oils or butters in the list.
Fast-drying alcohol in the first three ingredients.
Nothing here needs a detergent wash to remove.
Fragrance is listed; it sits below the working ingredients.
Ingredients that matter
The workhorse ingredients plus anything lower down that changes a decision. These chips name what an ingredient does — they are not safety scores, and no ingredient here is rated good or bad on its own.
| Ingredient | What it does | Why it matters | Chip |
|---|---|---|---|
| Hydrofluorocarbon 152a | propellant | Pushes the product out of the can | Neutral |
| Alcohol Denat. | drying alcohol | Sets the style fast — the same reason it can read dry | Drying |
| Octylacrylamide/Acrylates/Butylaminoethyl Methacrylate Copolymer | film former | Lays down the film that holds a shape | Holds |
| Rosmarinus Officinalis (Rosemary) Leaf Extract | botanical extract | A trace plant extract | Stabilizes |
| Chamomilla Recutita (Matricaria) Flower Extract | botanical extract | A trace plant extract | Neutral |
| Arnica Montana Flower Extract | botanical extract | A trace plant extract | Neutral |
| Lamium Album Extract | botanical extract | A trace plant extract | Neutral |
| Salvia Officinalis (Sage) Leaf Extract | botanical extract | A trace plant extract | Neutral |
| FragranceParfum / Fragrance | fragrance | The scent | Fragrance |
| Alpha-Isomethyl Ionone | fragrance | The scent | Fragrance |
| Linalool | fragrance | The scent | Fragrance |
US labelling rules put ingredients above 1% in descending order of amount; below 1% they may be listed in any order. Annotations keep three readings separate: the ingredient's general function, its role in this product type, and what its position can support.
A non-flammable aerosol propellant used in dry shampoos and finishing sprays.
Listed in the first three ingredients, it is likely a structural part of this formula.
Fast-drying alcohol used to make sprays set quickly. In leave-on products it can leave hair feeling dry, especially in high position on the list.
In hairspray, denatured alcohol acts as a fast-evaporating solvent that carries the styling polymers and helps distribute them in a fine spray. As it evaporates, the polymers remain on the hair to form the hold film.
Listed in the first three ingredients, it is likely a structural part of this formula.
May suit hair that needs a fast-drying, lightweight spray base rather than an oil- or wax-led finish.
Porous hair gives water up easily as it is; a fast-evaporating solvent high on the list accelerates that.
Consider if hair is very dry or highly damaged: when alcohol is this prominent, the fast-evaporating base may leave the hair feeling drier.
A firm hold polymer used in hairsprays and gels. It holds well in humidity and brushes out.
Listed in the first three ingredients, it is likely a structural part of this formula.
A set polymer film is a physical barrier to humidity, so a style keeps its shape longer in damp conditions.
Synthetic film formers dry into a continuous film, which is what holds a shape against movement and against humid air.
Some acrylate copolymers rinse with water and some need a detergent; the label alone does not say which one a formula used.
Rosemary extract, used both as a scent note and as a natural antioxidant in scalp products.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Chamomile extract, used for a soothing claim and a faint natural brightening on light hair.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Arnica extract, a traditional soothing botanical used at low levels.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
An extract of Lamium Album. Plant extracts are used across a wide range of levels, and label order is the best guide to how much is here.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Sage extract, a traditional scalp botanical used at low levels.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A cellulose derivative that dries to a firm, water-resistant film. Used for hold that survives humidity.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
A set polymer film is a physical barrier to humidity, so a style keeps its shape longer in damp conditions.
Synthetic film formers dry into a continuous film, which is what holds a shape against movement and against humid air.
Some acrylate copolymers rinse with water and some need a detergent; the label alone does not say which one a formula used.
A small water-loving molecule that draws moisture into the hair and holds it there. It is the most common softening ingredient in conditioners and leave-ins.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
High-porosity hair loses water fast; a humectant holds some of it in place for longer than the wash itself would.
Binds water into the outer layers of the strand, and water is what makes dry hair flexible again rather than brittle.
Water moves both ways. Measured across concentrations, glycerin solutions give water up in some conditions and take it from the air in others. What it does for you depends on how much of it is there and on the air around it.
A citrate ester used to stabilise fragrance and support the preservative system.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
pH adjusters are how a formula is brought to a chosen acidity, and an acidic formula keeps the cuticle lying flatter than an alkaline one. Which way this one moves the pH depends on the formula, and the finished pH is not on the label.
A corn-derived humectant and solvent, often chosen as a lighter-feeling alternative to propylene glycol.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Light and water-binding rather than oily, so it hydrates without contributing weight.
A small water-binding solvent. It holds moisture and helps the rest of the formula spread evenly over the strand.
A humectant follows the air: it holds water in humid conditions and can give it up in very dry ones. Climate decides what it does more than the label does.
Used to bring the product to a slightly acidic pH, which helps the cuticle lie flat. It is almost always near the end of the list.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Holds hard-water minerals in solution so they rinse away instead of depositing on the hair.
The acid side of pH adjustment, and the reason it matters is measured: alkaline formulas raise the fibre's surface negative charge, increase friction between strands and lift the scales, while lower-pH ones do the reverse.
Where a warm cast comes from water minerals rather than from the hair itself, holding those metals in solution is what removes it.
A base used in trace amounts to neutralise acidic hold polymers so they thicken and set properly.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
pH adjusters are how a formula is brought to a chosen acidity, and an acidic formula keeps the cuticle lying flatter than an alkaline one. Which way this one moves the pH depends on the formula, and the finished pH is not on the label.
An undisclosed blend of scent ingredients. Regulations let it stay unlisted, so a fragrance-free product is the only way to be certain what is not in it.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
Declared fragrance. On a fragrance-sensitive routine this is the line that decides it, wherever it sits on the label.
A violet-like fragrance component named separately as a recognised allergen.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.
A floral fragrance component listed separately as a recognised contact allergen.
It appears around or below the estimated 1% line, where label order no longer indicates relative amount; its role may be minor or technical.
One of the 26 scent components the EU requires to be named individually above a threshold. It is named because it is a known contact allergen, not because it is unusual.
Ingredient list captured 2026-08-27. Formulas change — check the package in your hand when an ingredient matters to you.
Price · 1.7 oz
Priced above the products that do the same job. Stores sell it above the $2 line; products that do this job typically go for about $4 at this size.
Sorted by price per ounce. Dated observations from our research, not live prices. Direct store pages, no affiliate links. We don’t sell this product.
Formula
Above the range for hairsprays per ounce for a formula that 8 lower-priced products come close to on ingredients and attributes.
The formula score is completeness for the job: the share of the systems this product type is normally built around that we can find in this list, weighted. It is not efficacy, not quality, and it never compares across product types.
Does the same job, for less
Same derived functions — what it cleans, conditions, coats or holds — at a lower cost per ounce. Scent, texture and where you buy it can still differ.
See more alternatives in the product library
These are functional neighbours, not personal recommendations — they are close on formula, not chosen for anyone. Get the one that fits your hair, routine, and budget

Final decision
Hair that stiffens on protein — for a protein-free formula and a curly-method-compatible formula
Not ideal for anyone sensitive to fragrance, very dry or high-damage hair, or anyone who will not scrunch out a cast
We do not sell products or take placement fees. This page states what the formula and the prices show; the consultation is what matches it to a person.
Claims check
Claims are quoted from the brand. We only mark one supported, partly supported, or conflicting when the ingredient list actually speaks to it; everything else stays "stated by the brand", which is not a criticism — most claims simply cannot be read off a label.
8-hour flexible hold, clinically tested
A brand-run study. We report it as stated and do not repeat the number as fact.
—
Only the brand’s testing shows this.
Soft, touchable finish
Hold polymers appear without the emollients that usually keep a film from setting firm.
Expect a cast you have to scrunch out.
Never stiff, sticky or flaky
Hold polymers appear without the emollients that usually keep a film from setting firm.
Expect a cast you have to scrunch out.
Silicone-free
No silicones appear in the ingredient list.
—
Nothing that needs a strong wash.
Buildable, flexible, all-day hold
Synthetic hold polymers are present.
Structure that lasts the day.
We look at the first 10–15 ingredients and what they do in a formula — not marketing. If the list doesn't speak to a claim, we don't assume.
Reviewers
Recurring themes our researchers wrote in their own words from sourced reviews. We do not store or scrape star ratings.
Not sticky at all; gentle flexible hold that works exactly as advertised
verified reviewerBoth cans clogged even when more than half full, despite trying the manufacturer's hot-water fix; lost her as a customer
1-star reviewer, 4 months before observationNozzle clogs after literally every single use, needs tweezers/a sharp object to clear each time
1-star reviewer, 27 days before observation