CLEANSER
Myristyl Glucoside
- cleanser
A mild sugar-derived cleanser with a low, soft foam.
- products in our library
- 7
- of researched products
- 0.1%
- on the label, in our leave-ins
- usually #12
- most common in
- Leave-in
- in water
- Water-soluble
At a glance
Four things worth knowing about how this ingredient behaves on hair.
How much of it is left on hair between washes.
What it takes to get it off the hair again.
How much oil it strips, as a class.
The foam the class is known for, not a measured volume.
| Property | Level | Out of |
|---|---|---|
| Buildup risk | Low | 1 of 5 |
| Rinse-out behaviour | Rinses clean | 5 of 5 |
| Cleansing strength | Very gentle | 2 of 5 |
| Lather | Soft | 3 of 5 |
What it does for a formula
What Myristyl Glucoside does
The general function first, then how the role changes by product type where we have researched it.
A glucoside or alkanolamide, common in co-washes and baby washes.
A milder detergent class, used where a formula avoids sulfates.
Water alone removes it, so it does not accumulate between washes.
Hair neither pulls it in nor pushes it away.
Charge
Carries no charge, so it neither clings to hair nor is pushed away by it. Nonionic ingredients are the mild, pH-tolerant workhorses of a formula.
Solubility
Rinses out with water alone, so it does not build up on hair between washes.
Where it appears
Where it appears
One row per product category in our library: how many products list it, what share of that category that is, and where it typically sits on the label.
| Product type | How common | Typical position on label ? |
|---|---|---|
Leave-in
2 products
|
secondary · #12 | |
Scalp treatment
2 products
|
secondary · #34 | |
Conditioner
1 product
|
secondary · #16 | |
Heat protectant
1 product
|
secondary · #19 | |
Styler: lotion
1 product
|
secondary · #14 |
| Product type | Products | Share of category | Median position | Earliest position | Band |
|---|---|---|---|---|---|
| Leave-in | 2 | 0% | 12 | 8 | secondary |
| Scalp treatment | 2 | 1% | 34 | 16 | secondary |
| Conditioner | 1 | 0% | 16 | 16 | secondary |
| Heat protectant | 1 | 0% | 19 | 19 | secondary |
| Styler: lotion | 1 | 3% | 14 | 14 | secondary |
We have not researched differences by product type yet. The reading below comes from where it sits on the labels in our library.
Position footprint
Every listing in our library, by position on the label.
| Positions | Zone | Listings |
|---|---|---|
| 1-3 | Leading | 0 |
| 4-8 | Supporting | 1 |
| 9-15 | Secondary | 2 |
| 16-25 | Lower | 3 |
| 26+ | Trace | 1 |
How to read this
US labelling rules put ingredients above 1% in descending order of amount; below 1% they may be listed in any order.
So position tells you about relative amount only above that line, and we never convert a position into a percentage.
Why it matters to shoppers
What seeing this ingredient tells you, what it does not, and the limits of our own method.
- the mildest cleansing
- a formula built for daily washing
- the gentlest cleanse a shampoo can give
- a product that actually cleans
- an exact safety score (we do not publish one for any ingredient)
- how a finished product performs, which depends on the whole formula, not one line of it
- the exact percentage in a bottle, because label position never converts into a number
- a secondary nonionic cleanser, listed below the main ingredients in our leave-ins
- it was on the printed ingredient list of every product we counted (we read labels, not marketing copy)
- that the product cannot clean properly
- that a product is right or wrong for you
We do not publish safety scores or hazard grades. Where a regulator has published a restriction or a use condition, we state it and cite it; otherwise we describe what the ingredient does and stop.
Commonly paired with
The ingredients that most often appear alongside this one in our library. We leave out the near-universal ones, because they pair with everything and tell you nothing.
- Polyglyceryl-6 Laurate · 7
- Lauryl Glucoside · 7
- Caprylyl Glycol · 6
- Propanediol · 5
- Chlorphenesin · 4
- Tocopherol · 4
- Pentylene Glycol · 3
- Xanthan Gum · 3
- Sodium PCA · 3
- Dimethiconol · 3
The number beside a name is how many products in our library list both.
These ingredients tend to appear together to clean and build foam, hold on to water, and carry the formula and let it dry.
Found in these products
The most prominent placements first. The badge is the position on that product’s own ingredient list.
R+Co · Leave-in
Candy Stripe Protect + Prep Detangling Spray
#8 on the label · $4.00/oz
It's a 10 · Styler
Potion Miracle Styling Potion
#14 on the label · $8.67/oz
It's a 10 · Leave-in
Miracle Leave-In Potion Plus Keratin
#15 on the label · $9.99/oz
Aveda · Conditioner
color control leave-in treatment: light
#16 on the label · $13.70/oz
Oribe · Scalp treatment
Serene Scalp Oil Control Treatment Mist
#16 on the label · $13.81/oz
LolaVie · Heat protectant
Speed Dry Heat Protectant Spray
#19 on the label · $6.00/oz
Virtue Labs · Scalp treatment
Overnight Scalp & Hair Elixir
#51 on the label · $36.47/oz
Identity
What this entry is, and what our references call it.
No public-domain structure depiction is available for this entry.
Myristyl Glucoside
- CAS 33508-66-6
- PubChem 10126394
- nonionic cleanser
- myristyl glucoside
For your hair?
Whether Myristyl Glucoside matters for your hair depends on your hair.
7 products in our library list itWhat this ingredient does, and where it sits on the labels we have researched.
A verdict on any product that contains it, and never a safety grade.
We do not physically test your hair. Everything above comes from the ingredient lists in our library and from published references. The consultation is what turns it into a plan.
References
Sourced Backed by a manufacturer or regulatory source.
This ingredient
- Manufacturer or regulatory PubChem : Compound identity: CID 10126394, CAS 33508-66-6, C20H40O6 · accessed 2026-08-28
How this page was made
- Every number above is counted from the ingredient lists in our own product library: 7 of 6816 researched products list this ingredient. Nothing on this page is written per ingredient.
- The dots are levels, not scores. Each one comes from what kind of ingredient it is (its chemical class, charge and solubility) or from where it sits on the labels we have.
- US labelling rules put ingredients above 1% in descending order of amount; below 1% they may be listed in any order. Position tells you about relative amount only above that line, and we never convert a position into a percentage.
- The prominence bands (leading, supporting, secondary) are the same ones the product pages use to read a single label, applied here to the median position across a category.
- We do not publish safety scores or hazard grades. Where a regulator has published a restriction or a use condition, we state it and cite it; otherwise we describe what the ingredient does and stop.
- Identifiers and references appear only when a published source is attached to this entry. Without one, we leave the row out rather than fill it in.
- This is cosmetic information, not medical advice, and nothing here diagnoses or treats a health condition.
- Entry last updated 2026-09-22. Product-page methodology: the product library.
