SILICONE
Dimethicone PEG-7 Phosphate
- silicone
A water-dispersible silicone used to smooth and to help other silicones spread evenly.
- products in our library
- 9
- of researched products
- 0.1%
- on the label, in our heat protectants
- usually #7
- most common in
- Heat protectant
- in water
- Water-soluble
At a glance
Four things worth knowing about how this ingredient behaves on hair.
How much of it is left on hair between washes.
What it takes to get it off the hair again.
How much easier it makes a comb pass.
How much the class is felt on fine hair.
| Property | Level | Out of |
|---|---|---|
| Buildup risk | Low, rinses out | 2 of 5 |
| Rinse-out behaviour | Rinses clean | 5 of 5 |
| Slip | Light | 3 of 5 |
| Weight | Light to medium | 2 of 5 |
What it does for a formula
What Dimethicone PEG-7 Phosphate does
The general function first, then how the role changes by product type where we have researched it.
Fills the gaps between lifted cuticle scales so light reflects evenly.
Lowers the drag a comb feels, which is most of what "detangling" means.
A PEG-modified silicone that ordinary shampoo removes, so it does not build up.
Without one, a cream separates in the bottle.
Charge
Negatively charged, like the hair surface itself, so hair pushes it away instead of holding on to it. It rinses off easily, and most detergents carry this charge.
Solubility
Rinses out with water alone, so it does not build up on hair between washes.
Where it appears
Where it appears
One row per product category in our library: how many products list it, what share of that category that is, and where it typically sits on the label.
| Product type | How common | Typical position on label ? |
|---|---|---|
Heat protectant
4 products
|
supporting · #7 | |
Leave-in
4 products
|
secondary · #9 | |
Finisher: shine spray
1 product
|
secondary · #9 |
| Product type | Products | Share of category | Median position | Earliest position | Band |
|---|---|---|---|---|---|
| Heat protectant | 4 | 2% | 7 | 4 | supporting |
| Leave-in | 4 | 1% | 9 | 8 | secondary |
| Finisher: shine spray | 1 | 1% | 9 | 9 | secondary |
We have not researched differences by product type yet. The reading below comes from where it sits on the labels in our library.
Position footprint
Every listing in our library, by position on the label.
| Positions | Zone | Listings |
|---|---|---|
| 1-3 | Leading | 0 |
| 4-8 | Supporting | 4 |
| 9-15 | Secondary | 5 |
| 16-25 | Lower | 0 |
| 26+ | Trace | 0 |
How to read this
US labelling rules put ingredients above 1% in descending order of amount; below 1% they may be listed in any order.
So position tells you about relative amount only above that line, and we never convert a position into a percentage.
Who should pay attention
Formulation guidance for specific hair conditions, limited to the label positions where it applies. It is not a conclusion about any finished product, or about you.
The PEG- and PPG-modified silicones disperse in water, so ordinary washing carries them off instead of leaving a film to accumulate.
A surface film slows how quickly humidity reaches the cortex, which is what limits swelling-driven frizz in damp air.
Delivers the slip and surface smoothing of a silicone without needing a detergent wash to remove it afterwards.
Near the top of a list, a conditioning film adds weight that fine hair loses volume to.
Read where it is listed in the first three ingredients or positions 4–8.Read from this ingredient’s chemical class. Where we have researched the ingredient itself, that reading replaces the class one.
Why it matters to shoppers
What seeing this ingredient tells you, what it does not, and the limits of our own method.
- slip that still rinses out
- slip and surface smoothing
- silicone slip without buildup
- a stable cream that does not separate
- an exact safety score (we do not publish one for any ingredient)
- how a finished product performs, which depends on the whole formula, not one line of it
- the exact percentage in a bottle, because label position never converts into a number
- a supporting silicone alongside the main ingredients in our heat protectants
- it was on the printed ingredient list of every product we counted (we read labels, not marketing copy)
- buildup, since the water-soluble ones rinse out with ordinary shampoo
- that you need a clarifying wash to remove it
- that a product is right or wrong for you
We do not publish safety scores or hazard grades. Where a regulator has published a restriction or a use condition, we state it and cite it; otherwise we describe what the ingredient does and stop.
Why some people avoid it
A conditioning agent that lays a smooth film on the cuticle, which is what delivers slip, shine and frizz control.
The water-insoluble ones need a detergent wash to remove, so on a routine that avoids detergent they accumulate and can leave hair feeling coated. That is the curly-method objection, and it is about buildup rather than harm. Water-soluble silicones rinse out and do not raise it.
Where regulators stand: Permitted. Some cyclic silicones are restricted in the EU on environmental grounds (they persist in waterways), not for anything to do with skin.
A formulation preference, not a regulatory finding
Browse products in our library without Dimethicone PEG-7 Phosphate
Commonly paired with
The ingredients that most often appear alongside this one in our library. We leave out the near-universal ones, because they pair with everything and tell you nothing.
- Xylose · 9
- Ethylhexylglycerin · 9
- Tocopherol · 7
- Trideceth-6 · 6
- Propylene Glycol Dicaprylate/Dicaprate · 6
- PPG-1 Trideceth-6 · 6
- Polyquaternium-37 · 6
- Amodimethicone · 6
- Sodium Hydroxide · 6
- Behentrimonium Chloride · 6
The number beside a name is how many products in our library list both.
These ingredients tend to appear together to hold on to water, soften the strand, and deliver a stated effect.
Found in these products
The most prominent placements first. The badge is the position on that product’s own ingredient list.
Mizani · Heat protectant
Style Shifter Society Heat Screen Heat Protectant Spray
#4 on the label · $3.18/oz
Redken · Heat protectant
THERMAL SPRAY LOW HOLD
#6 on the label · $3.53/oz
Garnier Fructis · Heat protectant
Style Sleek & Shine Flat Iron Perfector Flexible Hold Straightening Mist
#7 on the label · $0.81/oz
L'Oreal Professionnel · Leave-in
[TECNI.ART] Leave-in Spray
#8 on the label · $5.00/oz
Kerastase · Leave-in
Blond Absolu Blonde Guard Hydrating Leave-In Conditioner Spray with Hyaluronic Acid
#9 on the label · $7.79/oz
Kerastase · Finisher
Gloss Absolu Glaze Milk Anti-Frizz Spray
#9 on the label · $2.64/oz
L'Oreal Professionnel · Leave-in
[Vitamino Color] 10-In-1 Perfecting Multipurpose Spray
#9 on the label · $5.94/oz
Redken · Leave-in
One United All-In-One Multi-Benefit Treatment Spray
#10 on the label · $3.33/oz
Kerastase · Heat protectant
Genesis Defense Thermique Blow Dry Primer
#11 on the label · $9.80/oz
Identity
What this entry is, and what our references call it.
No public-domain structure depiction is available for this entry.
Dimethicone PEG-7 Phosphate
- emulsifier
- water-soluble silicone
- dimethicone peg-7 phosphate
For your hair?
Whether Dimethicone PEG-7 Phosphate matters for your hair depends on your hair.
9 products in our library list itWhat this ingredient does, and where it sits on the labels we have researched.
A verdict on any product that contains it, and never a safety grade.
We do not physically test your hair. Everything above comes from the ingredient lists in our library and from published references. The consultation is what turns it into a plan.
References
Seed entry, sourcing in progress Written from our reference work; primary sourcing is still being attached.
No published source is attached to this entry yet.
How this page was made
- Every number above is counted from the ingredient lists in our own product library: 9 of 6816 researched products list this ingredient. Nothing on this page is written per ingredient.
- The dots are levels, not scores. Each one comes from what kind of ingredient it is (its chemical class, charge and solubility) or from where it sits on the labels we have.
- US labelling rules put ingredients above 1% in descending order of amount; below 1% they may be listed in any order. Position tells you about relative amount only above that line, and we never convert a position into a percentage.
- The prominence bands (leading, supporting, secondary) are the same ones the product pages use to read a single label, applied here to the median position across a category.
- We do not publish safety scores or hazard grades. Where a regulator has published a restriction or a use condition, we state it and cite it; otherwise we describe what the ingredient does and stop.
- Identifiers and references appear only when a published source is attached to this entry. Without one, we leave the row out rather than fill it in.
- This is cosmetic information, not medical advice, and nothing here diagnoses or treats a health condition.
- Entry last updated 2026-09-22. Product-page methodology: the product library.
